yes, bullet feeders again

[AbitNutz]

I'm new to this forum but I've searched the site and Googled the world...and I mean that in the kindest possible way.
I take it the KISS bullet feeder is no more? Its kissed the big one? ...no wait. You know what I mean.

It may not make too much difference for me anyway as mostly shoot my own cast bullets and I don't think any bullet feeders will do this.

I'm waiting for the new LnL's W/EZject to come off of back order. I have a Dillon 550B and am mostly happy with it but thought I'd try red for once.

One day I'll see if I can burn down the house with a Magma "Master Caster" but every time I look at one it seems to have gone up to the point where now it costs more than myrrh.

OK..enough rambling...thanks

 

[jmorris]

The KISS is on hold due to a legal battle. GSIinternational makes one for the 650 and 1050. gaspariusa.com also makes a bullet feeder. I have the KISS unit and a few GSI’s but have never tried the gaspari unit. I prefer the GSI’s as they allow retention of the powder check die but they don’t make them for rifle bullets (why I have the KISS). The KISS collator is a very simple design that works great as long as you’re not using cast bullets. If you search here you’ll find a post around ‘05 that has a homemade collator I built for using cast bullets that was very effective. While you’re at it there are also posts on my homemade bullet casting machine that’s based on the mastercaster.

 

[AbitNutz]

Thanks so much for the info...I'll begin my quest.

 

[RickRak2000]

A KISS is just a KISS

Do a Google search for Mr. Bulletfeeder TM. The KISS trademark will no longer be used due to the legal dispute between my ex-partner and I.

Loosely quoting Shakespeare...

A Rose by any other name is still a Rose.

By the way, wax lubed cast lead bullets will work fine in the collator if you dust the bullets with some powdered mica. Just put the bullets in a coffee can, toss in a little powdered mica and coat the bullets. Prettty slick. (pun intended) You can get the mica from MidwayUSA and others.

Rick / RAK Systems, LLC

 

[lgbloader]

The GSI's are pretty slick. I have had my eye on them for my two XL650's. I have almost bought these a couple of times but I am afraid that if I do, I may fall asleep pulling the handle. That's the only reason I don't own 2.

LGB