BC17A
Member
- Joined
- Oct 5, 2018
- Messages
- 420
Needing someone with a reliable M70 to take a look at these pics and compare them with your ejector, or post some pics so I can compare.
My M70 is a single shot PoS Yugo at this point, and will fail to eject 100% of the time. Every round ends up like the pic below where the fired case will extract, but skirt by the ejector without contacting it, ending up in a jam. It fails regardless of ammo used, either new factory or reloads. From what I can tell, the ejector appears to be as designed and not broken, but the front edge may be worn or maybe needs to be bent inward slightly so the case rim can contact it. I threw in a few pics of the extractor also, but it appears to be new or near new.
I tried to tell from some online videos but none are clear enough to be of much use. Any help is much appreciated, Thanks.
My M70 is a single shot PoS Yugo at this point, and will fail to eject 100% of the time. Every round ends up like the pic below where the fired case will extract, but skirt by the ejector without contacting it, ending up in a jam. It fails regardless of ammo used, either new factory or reloads. From what I can tell, the ejector appears to be as designed and not broken, but the front edge may be worn or maybe needs to be bent inward slightly so the case rim can contact it. I threw in a few pics of the extractor also, but it appears to be new or near new.
I tried to tell from some online videos but none are clear enough to be of much use. Any help is much appreciated, Thanks.