Search results for query: *

Hi folks' I've been reloading 223 using a recipe of H335 26.5 gr up to 28 gr. Barnes Varmint Grenade bullet 36 gr. Win brass WSR primer OAL of 2.225 Shooting this through a 20" shaw heavy stainless 1-9 twist. I couldnt get groups better than 4 inches at 200 yds. Called Barnes...

Your builds look good, Where did you get the composite stocks for the black one? Here is a few pics of my romanian builds The first pic below shows refinished stocks on two builds. I cut off the front handles. Here is one bead blasted, range tested and ready for finishing : Some...

Duracoat sells specific camo kits. You can customize the camo as you wish. http://www.lauerweaponry.com/

also if you dont have a bead blaster you can take the parts to a machine shop and have them do it for you. I used a medium grit glass beads in my blaster. I left my bolt carrier in my AK's raw but covered the piston when I blasted it. I also plugged the chamber, muzzle and gas port on the...

Ive used duracoat and bead-blasting of parts is a must. I would recommend blasting parts as prep for any sprayed on finishes. above shows an AK kit blasted and ready for degreasing. I also used a dremel with a sanding wheel to knock down sharp edges on the rifle. Degreasing is highly...

overdrilled wow you had to really get busy with the drill to overdrill into the chamber. The trunnion thickness is only about 1/8" to 5/32" at best and will hold about 4 threads of a 10-32 screw. I assume your doing a screw build as drilling the trunion for rivets here involves pressing out the...

looks beefy :)

Ok I can find a gunsmith but what about the nose diving? is this still an issue?

well I received my mag springs, followers, and recoil spring today. I am dissapointed to say that the problem still exists. :confused: I notice when a full magazine is inserted, if I slowly release the slide while holding onto it I can watch the round nose-dive for about the first 1/2" of...

I might point out - to understand the guide posted by 5Wire is after shooting groups. When your groups are concentrated in a certain area of the target, you can refer to the diagram to somewhat correct the fault. The guide is excellant source to refer to. It even covers things most...

1911 and Fuff speak the truth :)

The more you shoot the more you develop the muscles needed. Biggest mistake at this point is to try to have good scores on your targets. You will only get discouraged. Although when shooting you should always try to hit the bullseye, and in doing so you will learn the disciplin your body...

Jennings will win this thread. :D

bigbore442001 I understand that it is of personal preferance to be (or try to be) 100% US made. I commend that. Unfortunately it is impossible in this day and age. One way to try to change some of this would be in how we all vote. NAFTA is getting old with alot of us and it is just one...

Yes and final fitting of the original safety to work with the timney will need to be done.

Unit 1 is truly God's country

Gun show today. I had some change left over too :D

If you still have photos that chronicle this, it would be nice to see them as I plan to do a build up like this in the future. :D

sounds like it would work in a perfect world. The plan sounds good, just be ready for plan B. Also one thing to think about is that quiet time you both will share while the clock ticks away waiting or the law. Im sure he will be pondering his next move during that time, whether it be to conceed...

Ive got the same gun. I know what you mean when you get a new toy and see it has a blemish. The scratch at the tip of the barrel, is it in the crown? Not sure about buffing out scratches. Usually Im the one that puts them in and I just chalk them up to character. Ruger does add a nice finish...