Search results for query: *

As the OP, I'm not up against squat if I don't care to be. To be honest, I regret ever starting this thread. Now remembering why I went 15 years without posting on this forum. Take Care

Cool, experience with both, How were the stock trigger pulls, any idea on sa/da pull weights? Action smoothness and consistency comparable between the two? Did you have one or both modified or run stock? Take Care

Ahem, Not to be rude, but does anyone have any input on the 2 revolvers in question? Take Care

Club competitions Actually more like good time get togethers including burgers and hot dogs, with bragging rights on the line. I have no desire in any way shape or form to get back into the cutthroat competition league and organisational matches and watching grown men whine and act complete...

9mm is a non-starter, In a revolver, I can load 357 mag down to 9mm performance, (or use 38 Sp), but the reverse is certainly not possible. Eight shots is the max either way, I'll err on the side of flexibility. Take Care

If my failing memory serves $1180. As to the Allchin Mini N frame mount, Definite possibility if I go for the PC N frame. There's a nib 3 moa Razor sitting in the shop that was taken in partial payment for tree work. I'm also a huge fan of the C-More Railway sights. Have a couple mounted on...

Weighing in on weight Either will be heavier than the 4 inch 715 I'm using now. If I stick with my current load(s), or similar, they'll be lighter charges with 158 gr tips. From that perspective either should be a step up in recoil management. As to red dot mounting, has anyone tried one of...

Six shots starting to be a disadvantage. Matches I've been shooting at the club I belong to, and other local clubs, are being dominated by the guys with 7 & 8 shots in revolver competitions, ( pin, dueling tree or plate). The old Monson 6 round DW 715 and the old guy hanging on to it seem to be...

Any experience? Looking at installing a Cmore Serendipity on a 1911 Gov't chambered in 45 acp. Research and discussions with the gunsmith / builder reveals they work with no issues on a 9mm chambering but throwing the 45 acp trash can out the 1911 ejector port when the sight is mounted can be a...

Try this, https://www.minox.com/index.php?id=riflescopes&L=1 This page gives you an overview of the lines / series of Minox scopes. Select the product line from the menu on the left to view the actual offerings and specs of each series. Check under the Tactical header for additional offerings...

If the budget allows, https://www.minox.com/index.php?L=1 Superb quality, built like the proverbial brick outhouse, generally on the smaller side when comparing features such as the objective size and scope power. Take Care

Oldies but goodies, Two that come to mind are the Winchester 69A and the old Remington Model 41 Targetmaster. Both can be easily had in your price range and are true American made classics. The Winchester 69A came in a couple of flavors, the target model had a Lyman rear aperture target sight...

Hemostats work just fine. Iadjusted the sights on my PTR91 with a set of straight hemostats. Needle nose pliers worked, but the hemostats worked much better. Take Care

Nope, no problems at all. Flame cutting on the DW was never an issue. Enjoy that new shooter and let us know how it goes. Take Care

Supermag, SuperMax, Maximum ??? I dunno. Fatelvis All I can tell you is I own and cherish a Monson, Mass DW Supermag and it is indeed chambered for and stamped 357 Maximum. The Supermag Series just denoted the size of the frame, the Supermag being the largest of the frame sizes. The...

Did just fine. My couple year old Fjestad puts that gun at about $350 give or take. Take Care

Good glass. Should have left the B&L label on 'em and charged more. The Bushnell Elite series scopes IMO represent some of the best optics and just as important, mechanicals for the money. You'll get many good years of service from that scope. I don't know if they still do or not, but...

Barrel sure does. You'll need a Supermag shroud however. Take Care

CDNN would be the first place I would try. Very reasonable, excellent service, and they stand behind what they sell. www.cdnninvestments.com Another source I have used for mags and highly recommend is www.clipsNstuff.com Take Care

Only the Monson, Mass guns were produced under the watchful eye of Daniel B. Wesson. Monson, Mass revolvers are considered to be among the most durable and accurate revolvers ever produced. Look up IHMSA records and for years all top places belonged to Dan Wesson revolvers. The Monson, Mass...