ArchAngelCD
Member.
Anyone know of a good Ruger gunsmith in the Scranton PA area? I have a Mark II that need work.
Thank you...
Thank you...
Ruger Gunsmith Needed (PA)
- Thread starter ArchAngelCD
- Start date
- Status
ColtPythonElite
Member
- Joined
- Jan 8, 2011
- Messages
- 10,477
What's it need?
OP
OP
ArchAngelCD
Member.
It's a long story.
I have a Clark Custom Mark II and I can't get it back together. Every time I've shot it over the years I took it completely apart to clean but last year after a range trip it would not go back together. I know how to reassemble, there is something wrong. I brought it to two local smiths and both can not reassemble. One feels the modified assembly pin is the problem. I'm trying to save the money of sending it back to Clark Custom and just wanted it verified by a known good gunsmith. I'm not sure about the two I went to.
It's been well over a year and I need that gun back. It's the most accurate semi-auto I own.
I have a Clark Custom Mark II and I can't get it back together. Every time I've shot it over the years I took it completely apart to clean but last year after a range trip it would not go back together. I know how to reassemble, there is something wrong. I brought it to two local smiths and both can not reassemble. One feels the modified assembly pin is the problem. I'm trying to save the money of sending it back to Clark Custom and just wanted it verified by a known good gunsmith. I'm not sure about the two I went to.
It's been well over a year and I need that gun back. It's the most accurate semi-auto I own.
Blue68f100
Member
Go to http://www.guntalk-online.com/service.html It has a step by step picture guide to walk you through the process. All photos are expandable for a close up view by clinking on them.
OP
OP
ArchAngelCD
Member.
While I appreciate the link I have a feeling you didn't really read my posts.
flphotog
Member
He's not in PA but I'd suggest that you contact Dennis at Sarona Gun Works, when it comes to the Mark series there is no better.
Blue68f100
Member
I did read the post. In most cases like this 1 part it flipped causing the problem.
OP
OP
ArchAngelCD
Member.
Like I said, I have been doing this for many years and two other people have also tried.
Anyone know of a good Ruger gunsmith? I'm still looking, thanks...
Anyone know of a good Ruger gunsmith? I'm still looking, thanks...
rabid wombat
Member
Before going further, give the fine people at Clark a call. After explaining the history, they may be able to talk you through it.
It shouldn''t bust the budget to call/write Clark (800 number?). A more complete description of the problem might help here; I never had all the problems with Rugers that others report, and have worked on some Clark guns, but without knowing just what "can't get it back together" entails, I can't help much.
Jim
Jim
BBBBill
Member
Attachments
- Status
