Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Ruger Gunsmith Needed (PA)

Discussion in 'Gunsmithing and Repairs' started by ArchAngelCD, May 16, 2017.

  1. ArchAngelCD

    ArchAngelCD Member

    Joined:
    Nov 25, 2006
    Messages:
    22,122
    Location:
    Northeast PA, USA
    Anyone know of a good Ruger gunsmith in the Scranton PA area? I have a Mark II that need work.

    Thank you...
     
  2. ColtPythonElite

    ColtPythonElite Member

    Joined:
    Jan 8, 2011
    Messages:
    7,655
    What's it need?
     
  3. ArchAngelCD

    ArchAngelCD Member

    Joined:
    Nov 25, 2006
    Messages:
    22,122
    Location:
    Northeast PA, USA
    It's a long story.

    I have a Clark Custom Mark II and I can't get it back together. Every time I've shot it over the years I took it completely apart to clean but last year after a range trip it would not go back together. I know how to reassemble, there is something wrong. I brought it to two local smiths and both can not reassemble. One feels the modified assembly pin is the problem. I'm trying to save the money of sending it back to Clark Custom and just wanted it verified by a known good gunsmith. I'm not sure about the two I went to.

    It's been well over a year and I need that gun back. It's the most accurate semi-auto I own.
     
  4. Blue68f100

    Blue68f100 Member

    Joined:
    May 25, 2011
    Messages:
    3,193
    Location:
    Piney Woods of East Texas
  5. ArchAngelCD

    ArchAngelCD Member

    Joined:
    Nov 25, 2006
    Messages:
    22,122
    Location:
    Northeast PA, USA
    While I appreciate the link I have a feeling you didn't really read my posts.
     
  6. flphotog

    flphotog Member

    Joined:
    Jan 20, 2013
    Messages:
    204
    Location:
    Clearwater,FL
    He's not in PA but I'd suggest that you contact Dennis at Sarona Gun Works, when it comes to the Mark series there is no better.
     
  7. Blue68f100

    Blue68f100 Member

    Joined:
    May 25, 2011
    Messages:
    3,193
    Location:
    Piney Woods of East Texas
    I did read the post. In most cases like this 1 part it flipped causing the problem.
     
  8. ArchAngelCD

    ArchAngelCD Member

    Joined:
    Nov 25, 2006
    Messages:
    22,122
    Location:
    Northeast PA, USA
    Like I said, I have been doing this for many years and two other people have also tried.

    Anyone know of a good Ruger gunsmith? I'm still looking, thanks...
     
  9. rabid wombat

    rabid wombat Member

    Joined:
    Mar 16, 2014
    Messages:
    100
    Location:
    TX
    Before going further, give the fine people at Clark a call. After explaining the history, they may be able to talk you through it.
     

Share This Page