well that solves that issue!I prefer the powder check/lock out dies that either stop the press (RCBS)or have have alarms (Dillon) vs one you have to keep your eye on (Hornady). A mirror stuck in the right place will work if you are always looking for the charge.
View attachment 1075917
Any that take standard dies.does the RCBS lockout die work on all progressive?
5,000 Lumin! Jezzz! your going to cause Nuke fissionI have a 5000 lumin LED shop light over the bench. It helps a lot.
Yes, the rod rises also.Does the RCBS have a visual function as well? like the rod goes up if there is powder?
I’m going to buy a lockout eventually or check.
well that settles that! $50! uggghhhYes, the rod rises also.
i’m get the rcbs because it has both lockout and visual40.00 from bass pro. 50.00 order and they ship free.
https://www.basspro.com/shop/en/hornady-powder-cop?searchTerm=powder cop
Just FYI the RCBS lockout die is designed for straight wall pistol cals, not bottleneck rifle.i’m get the rcbs because it has both lockout and visual
Well back to the drawing board. I wanted to do .223 and 9mmJust FYI the RCBS lockout die is designed for straight wall pistol cals, not bottleneck rifle.
Powder cop works with both.
Check out the Dillon powder check, it does rile and pistol.Well back to the drawing board. I wanted to do .223 and 9mm
and cost $100 bucksCheck out the Dillon powder check, it does rile and pistol.
https://www.dillonprecision.com/powder-check_8_120_23805.html