Search results for query: *

Seen a .22 lr round out of a semi auto ricochet off the forehead off a old sow one time many years ago . Luck had it no one was hurt. So it can happen.

Yeah they were fired in my rifle . Many thanks.

Hi Went to load some prvi partizan brass today neck sized it and they all are under spec ranging from 1.682 to 1.687 all were once fired factory brass . Am i correct in thinking these will be ok to use without any safety concerns. Regards wj.

Hello 20.5 grains of reloader 7 under a 50 grain seirra blitzking half inch groups out of my cz 527 at 100 yds . 22 grains of h 322 under a 50 grain nosler bt. 20 . 5 grains of vit n 120 under a 40 grain hornady v max . Note this is a over charge in the hornady manuel but safe in my rifle with...

20.5 grains of reloader 7 behind a 50 grain sierra blitzking ww case cci 400 primer. Rabbits out to 300 yards on a calm day.

Hi .makes me green with envy my friend bought 1000 remington 7 1-2 small rifle primers last Friday night cost him £40 approx $62.40 . makes me wish i lived in the good ole usa. Regards. Wj.

Hello all.Iam looking to buy a new heavy barelled .223 have looked at the cz .223 in kelvar the savage 12bvss the stery pro varmint and the tikka super varmint. I have a cz 527 varmint in .222 rem and am more than happy with it as its a real tack driver. Was thinking of staying with cz as it is...

Hi bobbo not sure what Your looking for is it the .222rem load data sheet that comes with the lee deluxe 3 die set . If so i have one here.

Brian try optics warehouse . Com . Find they are one of the cheapest in the uk . Google optics warehouse. welcome to Thr. Regards wj.

Evening all.Im having a problem with adjustment of my redding body die when i screw die in till it contacts the shellholder plus 1/8 turn case shoulder is being bumped back to far. Any less of a turn and die does not size shoulder at all.Shoulder is bumped to far when measured with .222 rem LE...

I use 20.5 grains of reloader 7 in my cz 527 varmint with a ww case cci 400 primer and a 50 grain blitzking. This load will shoot .5 inch all day. Happy shooting.

Yeah think i will use the 40grain vmax or blitzking with this powder. Regards smitty.Walkalong.

Evening all. Was wanting to know has anyone here tried vit n 120 in the .222 rem and if so what were the results like. Regards wj.

Its a cz 527 varmint . Feeding it with 20.5 grains of re 7 behind a 50 grain sierra bliztking.

Many thanks.

Hello what would be the best distance to zero a .222 rifle the scope is a 8x56 Rifles main use will be for fox and crows Regards.

yes sorry about that most scopes have l for left r for right on windage. Up for up and down for down on elavation . My schmidt has the elavation spelt in german and i was trying to work out what way is up and what is down. Regards .

Hello can anybody tell me tell what letter is left and what letter is right and which means up and down on a schmidt &bender scope. Regards. Wj.

lee trimmer and pilot. Same problem also happens to me with .222 rem . Im using the wooden ball grip handle . Trimmed 30 cases the other day some at .1690 spec but most between .1686 & .1689 . Are these ok to load and if so will these short cases have any bearing on accuracy. As 2 previous...

the scope in question is a schmidt & bender much to my relief it is mounted on rifle this morning. the eyepiece diametre of this scope is smaller than the meopta 7x 50 i had on rifle . Used cz kozap30 mm medium mounts plenty of clearance above barrel and between bolt handle and eyepiece. Kind...