My problem is this: Cast boolits sized to not lead my barrel will not chamber properly. They are not hitting the lands, but rather, the boolit diameter (.3585) is just a bit too fat to chamber in the throat. If i size them to .356, I can load them plenty long for my needs, but they are not...
I got a free 1,000 box of LPP magnum primers a while back. had no use for it, so just stored it away
Was sorting brass one day and realized I had about 300 45ACP cases.
Primers, brass... went out and purchased a 45acp
Since that time, have not seen a difference between magnum LPP and...
I have picked up a LM for 2018. Been VERY happy with it. Most issues have been resolved by changing how I operate/prep the machine and cases. I can load 100 in about 10-12 min when running smooth. I don't really load for huge volumes in one sitting. Just pump out 1-200 each night of the...
As far as load... I run Lee RN 1.060, and RNFP 1.065. Both are fairly deep IMO. Out of 5" MP2.0 3.9 HP238 was most accurate for me (2.4" off hand, which is good for me at 15y). Slightly larger groups found at 4.2 WSF and 3.8 TG.
YMMV, verify safely of course
Well I was able to get to the range to 'unload' some cases... you know, for the purpose of testing the tumbler of course.
indoor range
Ran 1 hour with 1/2 .45acp case of LS and 3/4 cap of Armorall Wash and Wax. Came out the olive drab tarnish again. I have found I can re-tumble these in corn...
I can get the solution locally. I think it is 19.99 a bottle or something. I had a hard time swallowing that for the cheap brass that I shoot (9mm and 223). Good to hear it works well cutting it.
I think you guys were correct on the too much lemishine. I did have one batch I ran with...
223 cases on bright orange towel with the FA solution. Mixed brass on ShamWow were my home brew. Just finished a batch with less lemishine. may re run those. They were once fired cleanish brass so was seeing if I could get them to shine up... does t appear as so
I got the 30# F.A.R.T. I have run probably 6 batches of cases through thus far. Using Armoral Wash n Wax for soap, and Lemishine powder.
I have been experimenting with times and volume of Lemi. From 1-4 45ACP cases worth.
Everything has been coming out really dull (one batch was too long I...
I decided I am out of luck. It seems odd. A 1.0 holster for the MP9L. Fits the 5” 2.0 but not the compact or standard 1.0. I ended up just picking up a GLS from cabelas that has different retention and fits all of my M&P without trouble
http://www.safariland.com/on/demandware.static/Sites-Site/Sites-tsg-Library/default/v1410801029884/resources/willfit/PT%204%202-9-18%20Concealment%20with%20and%20without%20lights%20-%20Pistols.pdf
This should be the comprehensive fit chart... you will want to know sub model of the holster
I picked up a Safariland ALS for my 5" M&P 2.0 (got the 9L non-thumb safety 7TS )
https://www.amazon.com/gp/product/B00GHG5NP8/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
I figured that since from the trigger guard back, my M&P 9 and 9c would fit in the holster... not so. I did take things...
SWC ran flawless at 1.250, RN 200 and 230 were also without problem. I guess I just stay away from the Berry's target HP. This gun won't be doing any duty as SD gun, so I don't see needing to run factory HP through it at any point really either. It's a steel plinking range gun
Thank you all...
Probably will leave it at this cause is getting beyond the reloading scope of this sub forum. But this is pun installed in forward position. As long as everything cycles now. I think I have asked enough of this $250 gun. Hahaha.
Interesting. I am re-working my load up. This was the ~130 for my G34. I have not gotten it on a CHRONO yet. But yes. They barely dribbled out. I run 130grain powder coated TC with 3.8 TG. CHRONO last summer out of the Glock at 1091
I ran my 130pf loads through without problem. I am guessing someone (apex) will make a redesigned trigger bar geometry. The only way to change the break and reset points internally as was done prior with a job in the sear. I think I will still go apex in the 2.0 just for the reshaped face that...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.