Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

1/2-28 by 1/2-28 Adapter

Discussion in 'NFA Firearms and Accessories' started by viking499, May 5, 2010.

Thread Status:
Not open for further replies.
  1. viking499

    viking499 Member

    Joined:
    Feb 9, 2007
    Messages:
    3,414
    Does anyone make an adapter that is 1/2-28 female by 1/2-28 male out of stainless or steel? Or would it be a custom made job?

    My thinking is that this can go on a tacsol barrel to keep from taking the chance on the aluminum threads. I would leave it on the barrel and just take the suppressor on and off.
     
  2. Wahoo95

    Wahoo95 Member

    Joined:
    Jul 6, 2009
    Messages:
    229
    You could just try slowing down and taking your time when installing/removing coupled with occasional cleaning of the threads? My Tac65 Can has aluminum endcap so I just make sure take my time when putting it on or off my steel threades barrels and I haven't had a problem yet.
     
  3. viking499

    viking499 Member

    Joined:
    Feb 9, 2007
    Messages:
    3,414
    I am looking at a stainless can and was worried about the threads on the aluminum tacsol barrel. Figured an adapter would take away the worry.
     
  4. Wahoo95

    Wahoo95 Member

    Joined:
    Jul 6, 2009
    Messages:
    229
    You are correct however it will only become a real problem if you are careless in installing/removing your can. My buddy has a Spectre he mounts to his TacSol and has never had an issue. I'd recommend against any sort of adapter as I have a threaded barrel extension/adapter on my CZ Kadet and it tends to fill with lead which is a pain to scrape out. I have to keep an eye on it to make sure it doesn't get bad enough to cause a baffle strike.
     
  5. viking499

    viking499 Member

    Joined:
    Feb 9, 2007
    Messages:
    3,414
    Had not thought of that possible problem..........
     
Thread Status:
Not open for further replies.

Share This Page