i epoxied the studs into the stock. you want a wood screw type for the rear and a machine screw/nut type for the front.
simply drill a hole slightly smaller diameter than the screw for the rear, mix up epoxy and let i run in the hole a bit screw in the stud and let it set up.
the front, you remove the barrel band, remove the barreled action and choose where you want to mount it. drill the hole, attach the machine screw stud with the washers and nut and either use loctite or epoxy to keep the nut on.
they make an attachment for the barrel band, but i don't really care for them. i can post some pics later if you want.