mesinge2
Member
I recently changed my MSH and the spring slipped off my sear. I got it back together and the hammer was free floating. So I took it apart again and reassembled. This time the hammer will cock and it will ignite primed brass. I did a function test and all the safeties work. So I think I did it correctly.
However, I just want to make sure its safe. If the sear and spring were not properly aligned would the hammer cock into single action?
Thanks for the help.
However, I just want to make sure its safe. If the sear and spring were not properly aligned would the hammer cock into single action?
Thanks for the help.