Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

22-250?

Discussion in 'Rifle Country' started by Col. Plink, Nov 17, 2009.

Thread Status:
Not open for further replies.
  1. Col. Plink

    Col. Plink Member

    Joined:
    Apr 21, 2009
    Messages:
    1,750
    Hey y'all,

    I know nothing about this caliber, including what the numbers mean. It is a .22" diameter with 250-grain slugs? I don't know, I'm just a cave man...

    But I do know that folks who who understand ballistics like this round, and that it's always available in WalMart, albeit in the dirty Remington CoreLokt stuff. What are the characteristics of this round? typica uses? I've found a K98 Mauser action barreled (new) in this caliber and am intrigued. Thanks in advance!
     
  2. NCsmitty

    NCsmitty Member

    Joined:
    Jun 29, 2008
    Messages:
    5,325
    Location:
    North Carolina
    The "250" indicates that the case used in developing the cartridge is based on the 250 Savage round, necked down to 22 caliber, which measures .224 in laymen terms.
    Fast and flat shooting, it can propel a 55gr bullet to around 3700 fps in most rifles and is a splendid varmint caliber.
    I have one that I built on a Turkish Mauser action.


    NCsmitty
     
  3. AirForceShooter

    AirForceShooter Member

    Joined:
    Oct 31, 2004
    Messages:
    2,748
    Location:
    Central Florida
    Flat
    Fast and will wear out a barrel.
    But it's fun.

    AFS
     
  4. Col. Plink

    Col. Plink Member

    Joined:
    Apr 21, 2009
    Messages:
    1,750
    With such light slugs, what (if any) advantage does 22-250 have over .223?
     
  5. Jim Watson

    Jim Watson Member

    Joined:
    Dec 24, 2002
    Messages:
    21,978
    About 500 fps and a somewhat flatter trajectory if shooting at long varmint ranges.
     
  6. NCsmitty

    NCsmitty Member

    Joined:
    Jun 29, 2008
    Messages:
    5,325
    Location:
    North Carolina
    400+ fps at the muzzle.



    NCsmitty
     
  7. MMCSRET

    MMCSRET Member

    Joined:
    Feb 18, 2008
    Messages:
    2,961
    Location:
    North Central Montana, across the Wide Missouri
    22-250 is boring with a capital "yawn"!!!!!!!! Easy to load, shoot and hit, if you can see it you can hit it, no challenge. It is good for almost everything up to and including open country deer. Every manufacturer makes guns and every ammo company loads it. Easy to handload for accuracy and fun to shoot; as I said "BORING".
     
  8. Uncle Mike

    Uncle Mike Member

    Joined:
    Nov 5, 2008
    Messages:
    3,129
    Location:
    never never land...never land here!
    22-250....Simply Awesome....!

    You get one...you'll never look back.... you'll pee on any .223's you run into after that. lol hehehehe
     
  9. Maverick223

    Maverick223 Member

    Joined:
    Dec 19, 2008
    Messages:
    11,262
    Location:
    28078
    LOL, that bullet would be about 1.5in. long and require something like a 1 in 4 twist to stabilize. It is a great varmint round...perhaps the best? As others have noted it is exceptionally accurate, flat shooting, and affords a pretty short barrel life. It can be used for small deer and the like, but using such a small projectile (.224) there are better choices IMO. Sounds like you have a nice rifle.

    :)
     
  10. Col. Plink

    Col. Plink Member

    Joined:
    Apr 21, 2009
    Messages:
    1,750
    Not yet. The ad in question is for a barreled action, nothing more (except for a sporterized stock not even pictured in the ad).

    Forgive a cave man, but what makes a round wear out a barrel faster or slower? Is the 22-250 really that fast in relation to other high-power rifle loads?

    PS: One man's "boring" is another man's "bad ass!"
     
  11. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
    Burning a lot of powder and pushing it through a small hole at very high velocity is what burns out barrels faster.

    As for 22-250 barrel life.
    It's not nearly as bad as some posters would have you believe.
    If you don't set down on a pararie dog town and shoot 500 rounds in one morning..

    I had a friend burn out a .243 Winchester barrel in a little over two hours doing exactly that.

    rc
     
  12. Col. Plink

    Col. Plink Member

    Joined:
    Apr 21, 2009
    Messages:
    1,750
    related question:

    the ad reads "new barrel (in the white)

    What does that mean? Never heard that expression before...
     
  13. All4eyes

    All4eyes Member

    Joined:
    May 18, 2007
    Messages:
    97
    Location:
    ND
    Great varmint caliber, fast flat, and accurate. 55gr Vmax, some H380, and pdogs, go splat. Coyotes and fox cginge at it, as the are not safe when the hang up a t 3 to 500 yds. Like was said earlier if you can see it, you can hit it.
     
  14. All4eyes

    All4eyes Member

    Joined:
    May 18, 2007
    Messages:
    97
    Location:
    ND
    Just means the action was rebarreled, could be a good thing if it is from a quality barrel maker.
     
  15. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
    "In the White" means it has not been blued or otherwise finished. Just bare steel as it came from the barrel maker.

    I gotta say, with the questions you are asking, a barreled action and an unfitted stock is probably not the gun for you!

    rc
     
  16. dubbleA

    dubbleA Member

    Joined:
    May 23, 2009
    Messages:
    1,410
    Location:
    Tejas del sur
    "in the white" means the barrel outside surface is unfinished, such having no bluing.
     
  17. Maverick223

    Maverick223 Member

    Joined:
    Dec 19, 2008
    Messages:
    11,262
    Location:
    28078
    It means that the barrel is not finished, and is likely chrome molybdenum steel (rather than stainless) and will need to be finished. Add $100.00+ to the price for bluing, unless you want to tackle the job yourself (no help here).

    :)
     
  18. Art Eatman

    Art Eatman Administrator Staff Member

    Joined:
    Dec 22, 2002
    Messages:
    42,985
    Location:
    Terlingua, TX; Thomasville,GA
    Barrel "burn out" is actually erosion of the very first part of the barrel in front of the chambered cartridge. The "throat" or "leade" of the barrel. Rapid rates of fire with the high temperatures of rather large powder charges and small-diameter (comparatively) bullets can mean the erosion will occur in the vicinity of maybe 1,200 to 2,000 rounds. However, most rifles are quite okay to four or five thousand, and some for many more.

    For a hunting rifle, it's rarely a problem--excepting prairie dogs. Deer or coyotes and suchlike are relatively few shots in any one year. PDs? Over a hundred in a day.

    Erosion in the leade can be repaired by having a competent gunsmith do some lathe work and set the barrel back a fraction of an inch, creating a new and unburned entrance to the barrel.

    The .22-250 was originally called the "Varminter", a name copyrighted by Nebraska gunsmith Jerry Gebby. Bullet technology of the general period 1930-1980 meant that most centerfire .22s were not all that reliable for deer-sized game. The last dozen or so years have seen a dramatic improvement due to demand, and precision shot placement allows reasonable use for deer hunting. The best use, however, for most folks is as a varmint rifle.
     
  19. Col. Plink

    Col. Plink Member

    Joined:
    Apr 21, 2009
    Messages:
    1,750
    Oh ye of little faith! Not saying I'm going to tackle this particular setup, but how else does someone work through their first project like this? Everyone has to ask the intro-level questions when they're learning, I am always trying to gain new insight on such things so I figure so much the better for me I know how to ask good questions!

    May not eventually go for a 22-250 at all either. Who knows? I'm pretty sure I'm smart enough and if I was properly careful I'm confident I could learn whatever I needed to eventually work through something like this. I figure it's my next long-term project in firearms.

    Another 22-250 Q: I know folks who hunt deer with .223's, I'm guessing 22-250 is just as good and possibly better, yes? (all other things being equal)
     
  20. X-Rap

    X-Rap Member

    Joined:
    Sep 23, 2006
    Messages:
    6,620
    Col. for the same reason some claim overkill with a magnum I say under kill with .22 centerfire. There are bullets that will increase the likelyhood of clean kills but even with them there are distance, placement, and balistic concerns that are far less relevant for 6mm and larger calibers. The 22-250 is a legal cartridge in some locals but just understand its limitations.
     
  21. Col. Plink

    Col. Plink Member

    Joined:
    Apr 21, 2009
    Messages:
    1,750
    If I got one it's more likely it would be a longrange plinker, maybe some varminting, unlikely anything else.
     
  22. twice barrel

    twice barrel Member

    Joined:
    Oct 21, 2009
    Messages:
    226
    Took my first deer with one around 1979. Wound looked the same as one I took with a 270; dropped where it stood just like the 270 hit one did. Not saying its a perfect deer hunting cartridge but it sure did the job for me that day.

    Why would anyone think it will destroy barrels? Even the 220 Swift reputed to do that truly didn't. Of course, a shooter can wear out any barrel if they choose to.

    Regards,

    TB
     
  23. fireman

    fireman Member

    Joined:
    Jul 20, 2008
    Messages:
    69
    Location:
    Montrose, CO.
    250-3000 Savage is the parent round.
    First commercial round that beat the 3000 FPS Barrier. Kind of like the 4 minute Mile.
    Fireman
     
  24. KFDiesel

    KFDiesel Member

    Joined:
    Aug 9, 2007
    Messages:
    53
    Location:
    Indiana
    how do you know if you have worn out the barrel?
     
  25. Maverick223

    Maverick223 Member

    Joined:
    Dec 19, 2008
    Messages:
    11,262
    Location:
    28078
    When a good shooting rifle, starts to loose accuracy, it can be new barrel time...but you need to tighten everything, check the optics & mounts (or sights), check the crown, and give it a thorough cleaning prior to trashing it. A hunting rifle (other than a varmint rig) will last darn near forever if properly maintained, but you are likely to go through a few barrels with a dedicated target rifle.

    :)
     
Thread Status:
Not open for further replies.

Share This Page