350 Legend, or 300 HAM'R

[Typetwelve]

So thoughts on using these for range plinking?

https://www.berrysmfg.com/product/9-147-fp

I'd have to goof around a bit with the loads, but CFE BLK and those projectiles might work in a short barrel. They list IMR4227, W296/H110 for 147g XTPs...but I really don't want to run it with those hot powders and really, none of those can be reduced.

 

[brewer12345]

So thoughts on using these for range plinking?

https://www.berrysmfg.com/product/9-147-fp

I'd have to goof around a bit with the loads, but CFE BLK and those projectiles might work in a short barrel. They list IMR4227, W296/H110 for 147g XTPs...but I really don't want to run it with those hot powders and really, none of those can be reduced.

I am thinking maybe something like a modest load of unique, say 6 or 7 grains? Its not like they won't exit the barrel.

 

[mcnabb100]

I would argue that aside from the .223 the .350 legend has the most available bullets out there. I make them by the millions. I've got customers loading our 9mms out to 2700 fps. Most AR barrels are just 9mm barrels chambered for the .350 legend casing. I've got a 20" xcalibur barrel that is gonna make the squirrels turn into pink mist this spring. Gonna use some 115 grain RMR MPRs and see how fast I can get them. I'm just waiting on the brass. Ordered some Starline almost 3 months ago. Hoping they come soon. But I've got about three months more before I get too worried.

I run 150 grain powder coated 9mm in mine, works great! Over a load of trailboss they average about 980fps out of my ruger american. Its an excellent supressed plinking load. Will probably investigate other powders, but i had the trail boss on hand.