350 magnum factory load data

[muzzlejoe]

hello, i have a 350 rem. mag and im looking for the factory load data. i been shooting the factory ammo with great groops at 100 yards. but the problem is the price for a box of 20. im shooting remington express core-lokt psp bullets, 200 gr. and the index number on the box is r350m1. hope someone can help me find the factory load data.
Thank you all.

 

[Kosh75287]

Take a look at Accurate Arms powders, www.accuratepowder.com. It looks like eventhe faster burning powders will allow you to duplicate the factory stuff. You don't mention what barrel length you have, but the slower burning powders will tend to give you better velocities or lower pressures, or some combination thereof.
Because the cartridge's ratio of case length to bore diameter is on the low side (i.e., it's stubby, with a big bullet), the use of VERY slow powder in the round probably won't get you much. Good luck.

 

[steveno]

the factory isn't going to tell you what their load is. there is a very good chance they use a commercial grade powder that isn't available to the rest of us

 

[muzzlejoe]

Hi again, the barrel length is 22 inch. looked on accurates site but didn't find any info on the 350 rem there. I will keep looking.
Thanks

 

[rcmodel]

Try Hodgdon.
They have a ton of .350 Rem data.

http://data.hodgdon.com/cartridge_load.asp

rcmodel