585 HE -- Barrels of Cases --

[hubel458]

What I find works great is porting in a decent

length barrel, big thick recoil pad, and some extra

weight in the butt, to balance the heavy profile barrel.Ed

 

[Willie Sutton]

Ed,

Always enjoy your posts, and looking forward to my rifle.


Willie


.

 

[blarby]

Willie, please let me know about your 585 when its done.

I've been watching this project evolve, and while the 12gaFH does not appeal to me, this certainly does.

 

[Willie Sutton]

^^ I'm having Ed build me one dressed up as a classic express rifle, African style. Enfield action, classic walnut stock. Planning banded front sight and banded front sling attach point if we can find parts of the diameter needed. One standing and two folding express rear sight. Good pad and likely some ballast in the stock. I like heavy rifles and have a modest collection of both classic Double Rifles and classic large bore bolt-guns from the 20's and 30's. This is going to be fun to play with.

Willie

.

 

[hubel458]

Here is a different look at 585 sabots holding 458cal bullets.
Sabots hold leafd as well as jacketed.



Here is a long turned streamlined bullet in our 585.




Anyone wanting to import barrels, actions, cases, etc into Canada from
here can work through Prophet River Firearms in Lloydminster, AB.

The here being the US, as well as our group with barrels, dies, cases,
and McGowen with .585 barrels in stock, CH4D with 585HE dies
in stock, gunshops with # 31 shellholders.
And later few retail outlets setup with cases in stock... . Ed

 

[hubel458]

Another application for our 585 HE is for guys with the 14.5mm
PTRDs, to use our case with chamber insert. In many places 14.5
cases are scarce, real expensive, as well as most 14.5mm cases
being steel are not the easiest to resize/reload. Our case sizes
like regular cases and can be easily reloaded many times.

And in a PTRD with almost a 5 foot long barrel can get 650gr
spitzer bullet to the same speed the 14.5mm gets a 900 gr using
3 times as much powder. 3300 fps. Or get a 900gr at 2800.
Great possibilities for fun shooting. And tactical use in a place
where it would be useful to reload in the operations field, where
steel cases are scarce. A 100 cases do over 2000 reloads.



I like Enfields to put our 585HEs in, for reasonable cost guns. .
Here is inexpensive way to fancy up the Enfield Bolt handle by
cutting the dogleg part of the old handle off and welding on
inexpensive contoured handles I found, one of which is like
Ruger 77 handle, one on the right . Something even a novice
like me can do.....



A lot of guys are crazy about CEB bullets. Here are light 450gr
ones in our 24ga FH. The hollowpoint can range in weight 450gr
to 700gr.. The 24ga FH is nice complement to our
585HE for the shotgun only deer hunters... Ed

 

[hubel458]

For lightweight plinking, deer hunting, etc, in 585HE as well as 24ga FH
here is picture of 58cal Hornady sabot that holds .451/.452" light
bullets 225 to 300 gr. A way to shoot targets economically. Low recoil
but a big bang and satisfaction. That sabot is one made for ML, but
with .452" bullet in it is a real tight fit in brass cases, to stay
in place and give good ignition. A 250 gr bullet would go about
mach 4 with a top load..



Here is what 585 bull barrel, target blank looks like, 1 5/8" OD and 32" long.
I'll go in heavy action of some kind. 4th one from the left. The one in yellow
sleave on top, is a heavy contoured one with muzzle of .980" ..The 5th, 6th,
7th blanks on bottom are straight 1.375" 585 regular twist blanks.
One in paper wrapper is slow twist 585 barrel...Ed

 

[Willie Sutton]

Keep it up Ed! How's mine coming?

Willie

.

 

[hubel458]

It is ready for stock which will get one coming

after the holidays. You wanted classic stock

and looks like Richards has one that will work.Ed

 

[hubel458]

Here is picture, nice cast bullet I like for the 585HE and 24ga FH.
It is .585" diameter and 650 gr and these particular ones are a
hard lead alloy, plus they've been heatreated. They are about as
hard as copper jacketed softs. These have a flat base, and
fairly streamlined..



But to penetrate good and do great damage to game or target they
can be soft lead and hollowbase like Minie Bullets. Here is picture
of timber drilled through with .585 soft lead Minie from 585HE.
Picture is the back of 6x6 timbers where Minie bullets came out. Ed

 

[hubel458]

In Canada there are 3 guys there now setting up 585HEs,
and one setting up 24ga FH. Another friend setting up a 585HE
handed out a bunch of cases and info sheets at the SCI convention.
We are getting some more reamers made. Some more dies sent
here. Another pallet load of cases coming.

Here is picture of a light spitzer bullet in the 24ga FH case,
will work in 585 also. Good for hunting and medium range
target work.



Here is picture of 585HE we did in the FBW with regular two
piece stock.We put a tenon on the forearm to wedge into the
front of the action below the barrel and a tight barrel band
on the front. Ed

 

[hubel458]

Here is comparison of our 585HE and Trex case, and while
we have barrels of cases and more coming and many available
in stock in AUS, many are finding Trex cases scarce...



Here is picture of a neat falling block that could work for our
585HE with little work, the Wickcliff.




Here is picture of the singlestack mag box we built for Enfields
fitted to the bottom of BBK action.Very little changing and
it fits a lot of different actions, as a fixed magazine, with its
own feed lips,and we load from the top.Ed

 

[hubel458]

Here is picture of a 585HE we did in a Mauser 98 as a
singleshot test gun. We used a composite stock we
adapted to fit action. Weighted to 12 lbs.



And speaking of singleshots a fellow in the Yukon is
just finishing up one in a Ruger #1.

Here is one reason to like 585 calibers is bullet varieties,
this picture is only about half the bullets and slugs
we know of, and most can easily found. Ed

 

[hubel458]

There is couple 585 videos on Swann Gunsmithing's Facebook site;

Of our 585HE in first Ruger #1, that was done in Australia, set up

for the poster Tankhunter on the AR big bore forums. That gun killed

the first buffalo that I posted picture of above. You can go

direct to the page and click on the videos to watch the test firings..

https://www.facebook.com/swanbarrels/videos


Here is picture our 585HE in a Montana PH action in a MPI stock, with the

style of a CZ stock, that a guy is setting up. The stock will be finished brown

and metal finished with a Gun Kote finish...Ed

 

[Frostbite]

Any example in double barrel with two triggers?

 

[RugerOldArmy]

Any testing against the armored vehicles these were designed to disable?

 

[hubel458]

I made the top barrel of my OU with 585.Has two triggers.

If I find a good, affordable double ten and get my ambition up
and find time,I may monoblock in 585 barrels.

As for AP use it could do as good/little better as 50 BMG.
Should do in those armored armadillos someone down
south said that their small bullets bounced off of!!.Ed

 

[Ky Larry]

No thanks. I'll just have someone beat my shoulder with a 2X4.

 

[hubel458]

One of the first of modern 585 caliber wildcats, since WW2, the 575 Miller Greiss Magnum,
was first in records in the fifties, It was made from BMG brass shortened to 2.70" long
and necked up from 50 cal to .585" with what looks li\ke a little sharper shoulder..

They rebated the rim quite a ways to .618" to maybe fit 98 Mauser bolt.Used a special action.
Listed as a shooting 750gr bullet about 2400 fps. It holds about 150gr of ball powder under
a 750 gr bullet, maybe little less than 3" 50cal spotter case, where our 585HE holds
180gr under a 750gr'.

We made one for experimenting on a full length BMG case.With rim left same as the base
and would need a BMG sized bolt and action. I'm glad to be a big bore wildcatter,
and happy to be in the company of big bore nuts, old and new. Years ago when
guys did big wildcats they took what was available, to rework, and maybe
they could have used the 3" spotter case if they could have found couple barrels full.

But it takes a lot of work to reform cases that much, with the multiple dies,
multiple annealings, and case trimming and extreme reworking of regular rifle actions,
which is why I like our 585 case, simple and straight, any regular long bolt action,
falling block, break action, etc, a 585 good for dozen or more heavy loadings,
moderate loads, last forever..

In making our 585HE we made it a size, actually new belted size, to fit regular size bolt guns,
(not BMG actions)that didn't have to be used from a tripod, and could be put in a favorite,
of many, the Ruger #1, other falling blocks, without taking metal out of the feed trough.
And to get the same and much more powder space as a cut back,
real short, fat, BMG case wildcatted to 585, we made longer case and worked with guys
with a group buy to get a factory run made. We thank gun nuts for the help.

Here is picture from the great site, cartridgecollector dot net, of the M&G Mag .Ed

 

[hubel458]

Probably first 375 caliber cartridge made from 585HE necked down, the 375 Warlord.

Guy did a real nice job, with what looks similiar to a Weatherby style shoulder.

Kinda outdoes Weatherby & Cheytac. We have cases with no headstamps for wildcatters.

First picture I got sent me today off of facebook and this one is from the great sniperforums.

Another fellow is planning on shortening the 585HE to maybe 2.4", for use Marlins and Henrys,

and other leverguns, redoing their 45-70s. With the belt they will have good headspace control.

Without a rim that takes up circular space, say like our 24ga FH, a 585 bore, but which is perfect

with a rim for break actions like our 24ga FH in a Magtech...Ed

 

[hubel458]

Sorry to be away so long. Health and money problems.
Here is how the top of the singlestack magazine looks that we
made to use in Enfields and other bolt actions. The lips that hold the
cases are springy, and we can load it from the top. The inside of action
below feed rails are relieved a little and that allows feed lips to
move and work ok.



Here are couple 24ga FHs break actions, a CBC with monoblocked
585 barrel in it, and a guys NEF he had a 585 barrel monoblocked in.
The 585 barrels are perfect fit for 24ga, and 585 Minie Bullets
are a perfect for barrel and 24ga case fit.






Another matter---It seems strange for me to ask for help when
I ask guys on the net for help at times. . But I really am in a bind.

That is truth, Our small income disappeared from our farms truck
garden business, as my my knees are shot and can't hardly
walk, I can't do field work, etc. And the wife's lung condition
got so bad she can't work.. So we finally had to quit that,
but were and are in debt. We need little extra money to try
to keep our health fixed up and pay bunch of back bills and utilities.
As well as needed for traveling to doctors, treatments,drugs, etc.

Could you all maybe get together with others on these forums
and kinda take up a collection to help get me out of my troubles and
debt. Like 10 or so bucks each put into our paypal account as gifts.
And if you want to mail it, contact me to get you
my mailing address.

The Paypal email is [email protected]

Best Regards- Ed

PS-- I really need help. Not astronomical amounts, but fairly fast.
Just a little from each to help. A quick boost so to speak.
We never made anything on the 12ga FH, etc, work and research.
The little coming from sale of 585 brass, dies, barrels,etc,
goes to pay to the places, where rest of the money
is owed, for getting them made..Ed

 

[hubel458]

Another action we researched that isn't priced 3 grand

or more that will work great for our 585HE is the

Stiller bolt action that is made for Cheytac based

cases. Less than 1200 dollars. Compares in size

to the Montana PH actions( four of them)

we have put the 585 in.Ed

 

[hubel458]

Here is picture of 375 Warlord next to our 585 case he made it from.
He is going to make couple later necked down to 416, and 458.
There is another guy working on doing one necked down to 357 wildcat.



Here is a picture of our poster Biebs on AR, 585 HE, in a MPI stock.
He used a big Enfield action, with a fancy jeweled bolt.



We found couple other big actions for our 585, that can even feed really
long overall length loaded cases, like 4.5" long or more, if you are
using long pointed bullets for real long range target and hunting work.
One is Lawton 8000 Cheytac action, and the other is Stiller Cheytac actions
made similiar, justa newer version. Both actions come in 1.45" diameter
and a 1.60" diameter recievers.

And Vestals Gunsmithing in Virginia does great work, decent prices, has
these actions and will build you fancy 585 HEs. .. He has, working with
another guys mag box setup, setup an extra long, good working, single
stack, center feed, magazine..He has our 585 HE reamer on hand, we have
barrels, cases, and reloading dies..Ed

 

[barnbwt]

Man, that's an evil looking cartridge. Didn't know they made Spitzers that long. I'm guessing it's not quite to the point of even a 50cal in terms of powder volume, but are they still getting good burn characteristics from that fat stack of powder funelling through the neck? I've heard of necked down BMG/20mm wildcats having issues getting powders that burn slow enough to avoid pressure spikes crashing up against the neck (again, I'm guessing 375 is still big enough to make it a non issue)

TCB

 

[hubel458]

Yes they will have to pack all of the right slow powder,

as much as possible. Double base powder be best.Ed