'Tactical' Bolt Action Picture Thread
- Thread starter kis2
- Start date
- Status
Dunno..never weighed it.
I'd guess 15-16 lbs. Heavy enough that recoil isn't bad if you hold onto it.
Cheapest brass I can find is once shot military for $1.85 per case. New Lapua is $2.25 per case (sold in 100 round boxes). Bullets run anywhere from .75 up to $1.30 per bullet.
Just to put it into perspective, a one lb bottle of propellant gets me 84 cartridges.
That stock pattern is their urban camo. I like it a lot too.
jpwilly
Member
I'll play:
Savage 10 308
Mossy ATR 30-06
Savage 10 308
Mossy ATR 30-06
arizona98tj
Member
OK....I'm in. Got this 10 FCP earlier this year. Haven't had a lot of range time with it. Started working up some loads for it and have made two trips to the range with them so far. Found one combo that shows promise. I need to work on it and see how it pans out.
Here is my 10 FCP HS Precision with a Bushnell Elite 4200 FFP 6-24x50 mil-dot illuminated recticle w/ mil-turrets. I added the Karsten cheek piece and the Harris bipod.
100 yards, about a month ago.....gotta love a factory barrel when a dime covers 5 shots.
This was one of the hand loads I mentioned.
Here is my 10 FCP HS Precision with a Bushnell Elite 4200 FFP 6-24x50 mil-dot illuminated recticle w/ mil-turrets. I added the Karsten cheek piece and the Harris bipod.
100 yards, about a month ago.....gotta love a factory barrel when a dime covers 5 shots.
This was one of the hand loads I mentioned.
sarduy
Member
what barrel are those in the savages?
260AI, BigHorn Arms left-hand action, bartlein bbl, mcmillan A5 stock, surgeon bottom metal, Thunderbeast 30p-1 suppressor, x-treme trigger, S&B PMII 5-25x
(Actually, I shot that bbl out over the winter and put a new bartlein on it that is 28.5", two.five inches longer than pictured)
(Actually, I shot that bbl out over the winter and put a new bartlein on it that is 28.5", two.five inches longer than pictured)
SpeedAKL
Member
These are some nice sticks! Keem em coming!
I run a Remington 700 SPS-V in .308. Don't have any good pics right now tho.
I run a Remington 700 SPS-V in .308. Don't have any good pics right now tho.
I am normally not a fan of HS stocks, but yours is very nice...I like the pattern.HS Precision HTR, left handed, Jewell trigger, 338 LM with an S&B 5-25 on top. Lots of fun but buying brass and bullets kill me.
I need to take some better pics....haven't had her out lately though.
BTW, you can get once fired brass for $1.50...that's all that I paid for my Lapua brass.
pdd, it never even occurred to me that it might be close. i just went and checked. the illum knob is about 3/4" farther forward than my bolt knob travels. So no, it's not in the way. However, if i had the scope an inch farther back, i believe it would make contact.
nwilliams
Member
Here's my FN PBR-XP with Sightron 4-16x42mm SII Big Sky scope. McMillan A5 Tactical Stock and CDI Precision Gunworks bottom metal.
Maverick223
Member
DTA-SRS .300WM with PRH 5-25x56mm (in 1pc. 40MOA proprietary mount) and GG&G HD-Swivel bipod:
OK, this is what I've been spending most of my rifle time with....
Remington 700 action
Krieger 26" heavy MTU profile barrel
Shilen trigger
HS Precision stock
Wyatt's bottom metal
Nightforce 20MOA base
Nightforce 5.5-22X50 with NP-R2 MOA reticle and Zero Stop
Remington 700 action
Krieger 26" heavy MTU profile barrel
Shilen trigger
HS Precision stock
Wyatt's bottom metal
Nightforce 20MOA base
Nightforce 5.5-22X50 with NP-R2 MOA reticle and Zero Stop
USSR
Member
The MTU is a very popular contour.
Winchester Model 70 action
Krieger 26" fluted MTU contour barrel in .30-06
McMillan A2 stock
Jewell trigger
Williams steel one-piece bottom metal
Speed Lock firing pin and spring
Badger Ordnance 20MOA base and rings
Leupold 6.5-20x50 M1 LR mildot scope
Pillar bedded and built by Jack Krieger
Teflon/Moly finish applied by myself
Don
Winchester Model 70 action
Krieger 26" fluted MTU contour barrel in .30-06
McMillan A2 stock
Jewell trigger
Williams steel one-piece bottom metal
Speed Lock firing pin and spring
Badger Ordnance 20MOA base and rings
Leupold 6.5-20x50 M1 LR mildot scope
Pillar bedded and built by Jack Krieger
Teflon/Moly finish applied by myself
Don
sounds good Taliv, maybe I will try to fit a 4-16 or the new 3-20 pm2.
I dug up a photo from a few months ago.
As usual, sorry about the bacon in the background.
stiller tac30 lefty action
22 inch shilen rem. varmint contour, chambered in 6.5x47 lapua (3400 rounds down this tube and still shooting)
manners t4, badger bottom metal
stiller 20moa base, seekins rings, vortex razor scope
seekins sling rail, accushot atlas bipod
switched back to my tuned remington trigger
and a sas arbiter for the suppressor
I dug up a photo from a few months ago.
As usual, sorry about the bacon in the background.
stiller tac30 lefty action
22 inch shilen rem. varmint contour, chambered in 6.5x47 lapua (3400 rounds down this tube and still shooting)
manners t4, badger bottom metal
stiller 20moa base, seekins rings, vortex razor scope
seekins sling rail, accushot atlas bipod
switched back to my tuned remington trigger
and a sas arbiter for the suppressor
Last edited:
Maverick223
Member
So is a 26in. Krieger...that's right, there's 26in. of Krieger goodness hidden in that crazy bullpup of mine (though it deviates slightly from the MTU contour trend).
Here's my F-Class (F-TR) rifle ... not really a tactical rifle although I used it in a 2-day tactical course taught by Chuck Taylor and it performed very well. I bought an AI AW recently but don't have any photos of it ... just a video of a friend shooting it.
http://www.youtube.com/watch?v=WKRtv90E_SU
Remington 700 action
PT&G 0.700" bolt with Sako extractor
TUBB firing pin and spring
Krieger fluted MTU #10 barrel with 1:10 twist
AICS stock
CG X-Treme Mod 22 two-stage trigger
Leupold Mark 4 8.5-25x50mm scope with ill. TMR
Badger Ordnance one-piece base
Seekins rings
Best result with this rifle so far was a 149-4X at 300 yards (15 shots in 15 minutes) shot late last year. Our 2011 F-Class season starts this coming Saturday.
http://www.youtube.com/watch?v=WKRtv90E_SU
Remington 700 action
PT&G 0.700" bolt with Sako extractor
TUBB firing pin and spring
Krieger fluted MTU #10 barrel with 1:10 twist
AICS stock
CG X-Treme Mod 22 two-stage trigger
Leupold Mark 4 8.5-25x50mm scope with ill. TMR
Badger Ordnance one-piece base
Seekins rings
Best result with this rifle so far was a 149-4X at 300 yards (15 shots in 15 minutes) shot late last year. Our 2011 F-Class season starts this coming Saturday.
Last edited:
- Status
