6mm-250?

[BsChoy]

I have done quite a few searches and can't locate but maybe 1 or 2 people shooting this caliber in this forum. My one and only question is should I neck up from 22-250 brass or down from the parent 250 savage brass? Any info is appreciated.

 

[Wil Terry]

Down.

...........

 

[rcmodel]

I agree. Down would be best.

Going Up could leave you with thin necks if the 22-250 brass was already minimum neck thickness to begin with.

But down may leave you with thick necks that will need reaming or turning.


rcmodel

 

[BsChoy]

thanks guys

 

[BsChoy]

oh and Will Terry....slow down you are toooo verbose LOL

 

[NateG]

you also might want to try looking into NRA high power sites... a bunch of the match rifle shooters use a cartridge, 6XC (for across the course) that is the 22-250 necked up to 6mm. nationalmatch.us would be a good place to start. Or, google 6mmXC and see what the hive-mind has to say about it. ...a couple of minutes pass... I'm bored, so I looked it up myself: Tubb (the guy who came up with the 6mmXC, and has won about a dozen national high-power championships) necks up from a .22-250. (well, I guess now he uses 6XC brass now) Of course, I don't know how similar the 6mmXC is to the 6mm-250. (or if they're the same, for that matter)