9mm CCI Blazer Alum vs 9mm Miwall Reloads

Status
Not open for further replies.

dxkj21

Member
Joined
Oct 2, 2005
Messages
225
I ordered a case of 9mm CCI Blazer and have shot halfway through it, no problems, runs great in my CZ 75


I also noticed that Miwall Reloads are back in stock at another site, and are about $5 cheaper a case (and end up being about 6$ more expensive thanks to difference in shipping)

So for $5 difference a case about , shipped, which would you go with? I see no reason to leave blazer as it is working for me, unless miwall reloads offer some advantage i do not know about.
 
Buy a box of the Miwall and try 'em if you can buy just one box. Mind you, I wouldn't use anybody's reloads but my own.
 
I've had real good luck with CCI aluminum Blazers.

Rapid Fire.
952_cci.jpg

I buy them in multiple case lots from Natchez to keep the price quite affordable.

Good Luck...

Joe
 
Buy a box of the Miwall and try 'em if you can buy just one box. Mind you, I wouldn't use anybody's reloads but my own.

Just about every commciel reload I've seen online cost more then I can get at Walmart. 9mm anyway.

-Bill
 
Miwall is very good ammunition.
I just shot several hundred rounds yesterday.

I'm lucky in that they attend most of the local shows here.
It's a little dirty but not any more so than WWB.

The advantage is that it's reloadable.
 
I've found that Miwall 9mm reloads have a little less flash than Blazer. You get an ammo can when you buy them in bulk (though I'm running out of things to do with the spare cans). And AFAIK, brass cases are easiest on extractors, but that difference could be negligible, particularly on service grade autos.
 
Haven't really used enough Miwall to form a firm opinion. FWIW, I ran more than 2K Blazer 115 gr. through my Witness in five days of training without a burp. Hit to POA, too. What more can you ask?
 
Status
Not open for further replies.
Back
Top