9MM confusion/ penetration/ barriers

[481]

I'd also like to point out that 147gr loads are far more forgiving on the gun. LASD Berettas last near forever cuz all they shoot is 147's for duty and 115's for qual. At least they did back in the late 90's when I worked there. Back in 1995 they had at least one that had over 50K rounds through it, an original 92F that hadn't cracked yet.

124+P beats the crap out of guns. My curre nt employer switched to 124+P a couple of years ago and I could immediately see the additional wear in the form of frame peening. Alot of guns started breaking and we finally got approval to buy brands other than S&W.

147's have less muzzle flash at night. They are more quiet. They are more accurate. My favorite 147 is the Ranger Talon.

The RA9T is a great round.

What brand/make of 124 +P has your current employer gone to?

 

[918v]

We first had Gold Dots, but now use either Golden Sabres or Tanger Talons. It changes from quarter to quarter.

 

[481]

We first had Gold Dots, but now use either Golden Sabres or Tanger Talons. It changes from quarter to quarter.

Thanks.

 

[notasfancy]

No problems for a 9mm to do many things pretty well, like many others. Look for proper ammunition just do not ask for things not reasonable. I mean not just for a 9mm but for any conventional rounds.
I managed to buy a substantial amount of Gratch goodies and have a modified system. The possibilities are endless.
Also .357Sig special purpose is the ticket.

I hope you do not go crazy with some of the non-sense replies.