Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Badger Ordnance scope mounts?

Discussion in 'Rifle Country' started by mbs357, May 11, 2006.

Thread Status:
Not open for further replies.
  1. mbs357

    mbs357 Member

    Joined:
    Dec 14, 2004
    Messages:
    1,621
    Location:
    Vienna, VA
    My uncle is looking to get a set of Max 50 scope mounts from Badger for his AR-50.
    This is their website: http://www.badgerordnance.com/productgroup.php?id=rings
    And here is what they say about the Max 50s:
    Can anyone vouch for Max 50's quality/toughness/etc?
    Thanks in advance.
     
  2. Jonathan

    Jonathan Member

    Joined:
    Jul 17, 2004
    Messages:
    227
    Location:
    Montana
    I have standard B.O. rings, as opposed to the 50s. The quality is great, but in all honesty, they're just chunks of immobile steel. Maybe I would need to purchase some cheap rings to appreciate my nice ones...


    If the friction between standard rings and the scope body would be the weak link for his rifle/base/etc system, go for the 50s. I can't imagine how that would be the case.

    Also, on the AR-50, it looks like the base really isn't that long. Although it's minimal, the 50s will cut down on how far forward you can set the scope: about 1/3 of an inch.
     
Thread Status:
Not open for further replies.

Share This Page