Body sizing only dies and effect on case necks.

[Bayourambler]

Is there a body size only die that has no affect on the shot size of neck?? I was hoping to bump shoulder back 1 0r 2 thousandths then run it through my lee neck collet die.

 

[edwardware]

Every major die shop except Lee makes Body Dies to size the body and bump the shoulder. You can also use any Bushing FL Sizer without a bushing.

 

[someguy2800]

I have one in 223 and 30-06 from redding. They work great.

 

[higgite]

Forster makes what they call a Bushing Bump Neck Sizing Die. You can leave the neck sizing bushing out and use it to just bump the shoulder back. Redding makes a FL length sizing die that uses bushings to size the neck. You can leave the bushing out and FL resize the case body only.

 

[Ireload2]

RCBS trim dies usually have a neck that is .010 larger than a FL resizing die.

 

[ants]

I use Redding body dies. I'm sure the others work also,
but I can testify that Redding body dies respond well to small adjustments.
I get them set for a particular rifle, then mark it with a scratch to repeat later.
I'm sure the others work, but just about everything from Redding works great.

 

[Blue68f100]

Like all ready said yes, several make the body die. I use the Redding S Bushing die. Just run with a bushing to size the body only.