Bazoo
Member
Some of ya’ll might have noticed I haven’t been on the forum a lot lately, well life's been a bit hectic here, with a 4 year old, fishing season, a couple of new guns, and working on my webapp.
Reloading and cast bullets are my passions, but when I started to learn programming, I decided to combine the two and the result is https://bulletmatch.com/
With my friend and I putting a combined 300+ hours into it so far, I still have thousands of bullets to enter but I figured I'd let the cat out of the bag so anyone interested could watch it grow. Thank you to all those people who have provided samples for me to enter. I’m still looking for new and variant samples, so if you’d like to help, please message me.
With my site, you can see high resolution pictures and measurements of bullets. You can find bullets from all the brands of mould makers AND commercial casting outfits all in one place. That way you don’t have to go to many different places to get info, if that info is even available.
You can compare seating depths and used case volume to better assist in bullet substitutions, find a new bullet for your reloading project, or just learn about them.
We created a lead alloy calculator https://bulletmatch.com/pages/lead-alloy-calculator to help the casting community figure all of that scrap lead that’s been setting around.
There are pages for removing leading, and gun cleaning, as well as a reloading and casting tutorial we’re working on.
We are working on the site daily, doing research, adding information, writing, adding bullets and taking pictures.
The casting and reloading community was a major factor in undertaking this project. Preserving the rich history of the many companies of the past and present, as well as providing something every reloading and caster can use are our mission. My own struggles in working up loads using bullets that have no data were instrumental in my undertaking of cataloging so many cast bullets.
Thanks everyone for taking the time to check it out. If anyone has any suggestions for pages, bullet samples they'd like to see or add, feel free to suggest them.
Bazoo
Reloading and cast bullets are my passions, but when I started to learn programming, I decided to combine the two and the result is https://bulletmatch.com/
With my friend and I putting a combined 300+ hours into it so far, I still have thousands of bullets to enter but I figured I'd let the cat out of the bag so anyone interested could watch it grow. Thank you to all those people who have provided samples for me to enter. I’m still looking for new and variant samples, so if you’d like to help, please message me.
With my site, you can see high resolution pictures and measurements of bullets. You can find bullets from all the brands of mould makers AND commercial casting outfits all in one place. That way you don’t have to go to many different places to get info, if that info is even available.
You can compare seating depths and used case volume to better assist in bullet substitutions, find a new bullet for your reloading project, or just learn about them.
We created a lead alloy calculator https://bulletmatch.com/pages/lead-alloy-calculator to help the casting community figure all of that scrap lead that’s been setting around.
There are pages for removing leading, and gun cleaning, as well as a reloading and casting tutorial we’re working on.
We are working on the site daily, doing research, adding information, writing, adding bullets and taking pictures.
The casting and reloading community was a major factor in undertaking this project. Preserving the rich history of the many companies of the past and present, as well as providing something every reloading and caster can use are our mission. My own struggles in working up loads using bullets that have no data were instrumental in my undertaking of cataloging so many cast bullets.
Thanks everyone for taking the time to check it out. If anyone has any suggestions for pages, bullet samples they'd like to see or add, feel free to suggest them.
Bazoo