Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Cap and Ball Revolver Manufacturers

Discussion in 'Blackpowder' started by Dr_B, Feb 10, 2013.

Thread Status:
Not open for further replies.
  1. Dr_B

    Dr_B member

    Joined:
    Nov 18, 2010
    Messages:
    822
    Location:
    Pacific Northwest, east of Washington but west of
    How many companies are currently making cap and ball revolvers? When I shop around on the net, I keep seeing guns available from Uberti and Pietta and really nothing else. I've see revolvers by other companies that seem to have stopped making them. I just got my first one, a Pietta 1851 Navy. If I want to buy another black powder revolver will I be limited to whatever Pietta and Uberti produce?
     
  2. Gatofeo

    Gatofeo Member

    Joined:
    Feb 17, 2004
    Messages:
    428
    Location:
    Remote Utah desert
    Pretty much.
    They're the two leading manufacturers for cap and ball revolvers you can purchase in the states, aside from the Ruger Old Army.
    I've heard that a German firm makes cap and ball revolvers, but I"m unsure if it's still in business. Or ever was. Just one of those things I kept hearing, but couldn't verify.
    Palmetto is, I believe, out of business. Its quality was -- to be kind -- less than desirable.
    In the 1960s there were plenty of cap and ball revolver makers in Spain and Belgium too, but their production of such revolvers ceased in the 1980s and 1990s.
    I wish someone would make stainless steel clones of the Colt Navies and Army. Colt offered them in the 1980s for a short while, with its second generation production. I saw a stainless steel 1851 and 1860 in a gun store in Tacoma, Washington about 1987. Wish to heck I'd bought one or both, but money was tight at the time.
    Colt stopped offering its cap and ball revolvers in the late 1990s, leaving Uberti, Ruger and Pietta as the front-runners.
    (Yes, I know that major parts were roughly made by Uberti, then shipped to the States for final finishing by Colt and its contractors. I know that. You don't have to mention it, I know it.) :scrutiny:
     
  3. EljaySL

    EljaySL Member

    Joined:
    Sep 10, 2011
    Messages:
    636
    Location:
    California
    Pedersoli makes a couple of them. I'm not sure how often you'll see them in the US but presumably you could get one special order.

    There have been other makers over the years so if there's some historic model that isn't in current production chances are somebody's made a reproduction at some point. But really there were only so many cap and ball revolvers made. It was a transitional technology and only in use for so many years.

    The big problem are things like, oh, the Paterson. There were a bunch of sub-models, and Uberti used to make some but don't anymore, and Pietta makes one of the versions and seems to only make them occasionally. So there will be times you can't get one for a couple of years, and then suddenly they're on the market again. But the whole time they're listed on the maker's website, because it's not officially out of production, they're just not making any at the moment. It's a little annoying but basically I'd make a list of any cap and ball revolvers you would like to have and as you get sales at Cabela's get those first and don't worry about the rare ones until you've exhausted the other options.
     
  4. zimmerstutzen

    zimmerstutzen Member

    Joined:
    Jul 30, 2009
    Messages:
    1,071
    Location:
    banks of the Susquehanna
  5. rcflint

    rcflint Member

    Joined:
    Apr 23, 2006
    Messages:
    352
    Location:
    Tucson, Arizona
    Both Uberti and Pietta make stainless steel Remingtons. Neither currently seem to offer Colt types in stainless.
     
  6. 4speed

    4speed Member

    Joined:
    Aug 5, 2012
    Messages:
    55
    Location:
    Bartow County Georgia
    Some of the America Remembers/U.S. Historical Society/American Historical Foundation's commemorative revolvers were made by Williamsburg Firearms Manufactory using Uberti parts. That's the reason there are no Italian proof marks or other manufacturers marks. There was also the Virginia Firearms Manufactory that made some of these commemoratives. Their makers mark is the Crown over V.* I believe also that Uberti made a belt model #2 Paterson set for them some years back. As far as anyone actually manufactering from scratch I don't think there are any but Pietta and Uberti.

    * Credit this tidbit to Fingers McGee. I got this information from him a while back on a different forum.:)
     
  7. rondog

    rondog Member

    Joined:
    Jun 29, 2007
    Messages:
    6,814
    Location:
    Commurado
    Ruger still make them?
     
  8. Cosmoline

    Cosmoline Member

    Joined:
    Dec 29, 2002
    Messages:
    23,648
    Location:
    Los Anchorage
    Ruger is out of the Old Army business as of a few years ago I believe.

    I've heard rumors that USFA was going to start making some high end C&B's but I never saw one materialize. I'm not sure what the hangup is.
     
  9. EljaySL

    EljaySL Member

    Joined:
    Sep 10, 2011
    Messages:
    636
    Location:
    California
    Yeah, they stopped making them and prices have gotten a little out of hand but you can get a used one easily enough.
     
  10. Fingers McGee

    Fingers McGee Member

    Joined:
    Apr 5, 2009
    Messages:
    1,525
    Location:
    High and dry at Lake of the Ozarks, MO
    If you want a currently made one the answer is yes.

    On GunBroker & other auction sites, you can find NIB, slightly used, and well used examples of C&Bs that were made by Armi San Marco, Armi San Paolo(Euroarms), Palmetto, USFA, Colt (2nd Gen & Signature Series), BLG, PR, COM, Centennial (Centaure), High Standard, Ruger (ROA) and Pedersoli. Prices range from $150 to well over a grand, sometimes approaching 2.
     
  11. Dr_B

    Dr_B member

    Joined:
    Nov 18, 2010
    Messages:
    822
    Location:
    Pacific Northwest, east of Washington but west of
    Uh oh, I took it to the range for the first time today. Had so much fun, now I know I'm gonna have to get another black powder revolver.
     
  12. Mike OTDP

    Mike OTDP Member

    Joined:
    Oct 31, 2007
    Messages:
    1,724
    Location:
    Somewhere in Maryland
    Revolvers are currently made by Uberti, Pietta, Pedersoli, and Feinwerkbau.
     
  13. EljaySL

    EljaySL Member

    Joined:
    Sep 10, 2011
    Messages:
    636
    Location:
    California
    And so it begins. I'd recommend either trying the 1858 design next to see if you prefer that versus the Colt pattern, or just stick with the Colt pattern and get a Walker or Dragoon. (Oh, who am I kidding, if you're going large just go with the Walker).
     
  14. zimmerstutzen

    zimmerstutzen Member

    Joined:
    Jul 30, 2009
    Messages:
    1,071
    Location:
    banks of the Susquehanna
    I think there is another German company that makes a revolver as well ( In addition to Feinwerkbau). I came across it once and can't find it again.
     
  15. Mike OTDP

    Mike OTDP Member

    Joined:
    Oct 31, 2007
    Messages:
    1,724
    Location:
    Somewhere in Maryland
    Hege sells a Remington repro that is outstanding. It should be, Feinwerkbau makes it for them.
     
  16. 72coupe

    72coupe Member

    Joined:
    Jun 24, 2008
    Messages:
    914
    Location:
    Iowa Park, Texas
    Last night I looked at the Fienwerkbau site and they show a very nice looking copy of the Rogers and Spencer revolver. I couldn't find a price for it though.
     
  17. Mike OTDP

    Mike OTDP Member

    Joined:
    Oct 31, 2007
    Messages:
    1,724
    Location:
    Somewhere in Maryland
    About $1700, these days. I own one. Great gun.
     
Thread Status:
Not open for further replies.

Share This Page