Ignition Override
Member
My only reloading has been for my Enfields (began in Feb '10). Now almost ready with the process for the M-1 Garand (bought fast-burn H 4895, have LC Ball ammo and Used Rem. cases)
The directions for these Redding 30-06 dies (unlike Lee/RCBS) tell you to clean out all of the internal parts of the dies "with bore solvent and a brass bristle brush".
It says to then use a thin coat of case lube to the inside of the sizer die. For the Enfields, I only have the Lee Resizing Lube.
1) Will this work in the dies? After lubing it seems to dry out pretty quickly. My "Gun Guru" uses a very fine powder on his.
2)Will this lube work for Full-Length 30-06 case Preparation?
On Prvi .303, it is needed on the necks ( only do neck-sizing).
The directions for these Redding 30-06 dies (unlike Lee/RCBS) tell you to clean out all of the internal parts of the dies "with bore solvent and a brass bristle brush".
It says to then use a thin coat of case lube to the inside of the sizer die. For the Enfields, I only have the Lee Resizing Lube.
1) Will this work in the dies? After lubing it seems to dry out pretty quickly. My "Gun Guru" uses a very fine powder on his.
2)Will this lube work for Full-Length 30-06 case Preparation?
On Prvi .303, it is needed on the necks ( only do neck-sizing).
Last edited: