"I was loading some 9mm and a couple would not drop in the case gauge. So thinking or maybe I wasn't, I decided to try to run them through the Bulge Buster. Well you guessed it, I used my 9mm Luger FCD and now there is a loaded round very, very stuck in it. Is there a safe way to remove it or do I just order another 9mm Luger AND 9mm Markov die?"
Removing a stuck round should be an easy fix with common tools.
You need a deep socket to accept the 9mm round, You need a similar socket that can push the round through the FCD. Now use your vice, you'll have three tools lined up. The larger deep socket, the FCD and a small socket to push through the 9mm round. Your vice will do all the work and you will end up with the round in the deep socket and a cleared FCD!
Smiles,