Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Did the 15 minute AR trigger job

Discussion in 'Rifle Country' started by BAT1, Nov 30, 2006.

Thread Status:
Not open for further replies.
  1. BAT1

    BAT1 Member

    Joined:
    Nov 28, 2006
    Messages:
    513
    This has been going around, and it works and it's free. It definitely lightens the trigger pull.
    www.sargenthome.com/15_Minute_AR_Trigger_Job.htm It's almost like a 2 stage with a crisp pop. Follow directions and Happy Holidays especially to the guys in uniform. :cool:
     
  2. Soybomb

    Soybomb Member

    Joined:
    Oct 31, 2005
    Messages:
    3,959
    I've seen that before but it made me a little nervous from a reliability standpoint. Glad to hear it works!
     
  3. Bartholomew Roberts

    Bartholomew Roberts Moderator Emeritus

    Joined:
    Dec 26, 2002
    Messages:
    14,613
    Location:
    Texas
    The key to that is not to polish through the hardening (which is usually very thin on most AR triggers). I am also not a fan of clipping one leg of the hammer spring either.

    One real simple change you can do that benefits almost any AR trigger immediately is to use tight fitting trigger and hammer pins that are polished.
     
Thread Status:
Not open for further replies.

Share This Page