OS/N
Member
- Joined
- Nov 2, 2023
- Messages
- 259
Your fired brass is your reference. Use the compariitor against fired cases and don't worry about factory loads. If the bolt closes on the factory round it is good to shoot.
If you set your die to match factory it will be inside saami spec but not optimized to your chamber. If you load for several guns that may be fine or set it the the firearm with the tightest chamber so its safe in all.
If you set your die to match factory it will be inside saami spec but not optimized to your chamber. If you load for several guns that may be fine or set it the the firearm with the tightest chamber so its safe in all.
Last edited: