Speedo66
Member
Yes, unfortunately for the retired LEO/ Security Guard in Buffalo.
Foxtrot Mike FM15 Gen 2
- Thread starter JShirley
- Start date
- Status
berettaprofessor
Member
Have an FM9 and love the thing. And their customer service is fantastic. I initially didn't like the open flash-hider on the thing. They sell separate a really nice screw-in end to it if you but ask. And cheaply.
For those having trouble with M-Lok, watch a video; I had the same issues and then learned that they can be tightened quite easily.
Great to hear you had a good experience.
My problem was that they wouldn't tighten into place on their own. Only one of the screws rotated into place as I tightened. All the others I had to nudge into place with a screwdriver.
berettaprofessor
Member
This was revolutionary to me for placing M-Lok's. Watch this starting at about 2 minutes and going to 3:40...or the end.
Most videos on installation get it wrong. The key is to fully thread the screws into the "nuts" to begin with...mount the plate into the slots....back off until the nut turns, and then retighten. Easy Peasy and no need to hold pressure up on the plate while you tighten or hold the nut at 90 while you tighten!
Most videos on installation get it wrong. The key is to fully thread the screws into the "nuts" to begin with...mount the plate into the slots....back off until the nut turns, and then retighten. Easy Peasy and no need to hold pressure up on the plate while you tighten or hold the nut at 90 while you tighten!
- Status
