Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Getting into reloading rifle

Discussion in 'Handloading and Reloading' started by jose wales, Feb 16, 2013.

Thread Status:
Not open for further replies.
  1. jose wales

    jose wales Member

    Joined:
    Feb 16, 2013
    Messages:
    15
    :banghead:I am getting started in reloading rifle, have reloaded shotshell. Have a few questions, bullets for 7 Mag= have 140gr Nosler Ballistic Tips and looking at the 140 gr TTSX any ideas ?? Have Hodgdon H 100v powder , match primers from Federal. I think this is a good place to start. Has any one used H 100v ??:banghead:
     
  2. A-FIXER

    A-FIXER Member

    Joined:
    Jan 26, 2009
    Messages:
    502
    Location:
    USA
    You need a Lee's 2 edt,,
    Hybrid100, start grn-57.0 fps-2895 max-63.0 fps-3138 pressure 59800psi col-3.250
     
  3. SlowFuse

    SlowFuse Member

    Joined:
    Mar 31, 2011
    Messages:
    1,043
    Location:
    Heart of Dixie
    On the 100V powder...

    I used this to load 25-06 and 257 Wby Mag. Start low and work up. I started seeing pressure signs at around 2 grains under max according to Hodgdons data. It proved to be a good accurate powder though even with cheap plinking bullets.
     
Thread Status:
Not open for further replies.

Share This Page