Giving away my reloaded ammo

Status
Not open for further replies.
Those showing interest in reloading, whether doing their own or buying reloads are assuming it will cost way less.
They still believe this in the current situation, sadly, even more so. :(
That's why it's the 1st time for people you've known for a while begging for ammo.
They'll get over it, the same as NOT buying ammo the last time...they got over it. :cuss:
The difference now is they have someone to blame...YOU:scrutiny:
:D
 
There is nothing like stressful times to show who is a friend and who isn't. I would never give away my reloads--to anyone. Well. I better exempt my wife from that statement. A refusal might just have me doing my own cooking and I hate to cook.
 
NVcharlie said:
Problem solved by loaning my 550 press to a new friend. Cant help everyone but i can help those who show a little initiative. Msgt James was elated.
Click to expand...

** Good decision. Now give him the Dillon Precision telephone number (480) 948-8009 for specific questions and guidance after reviewing this link to the Dillon Videos Library: https://www.dillonprecision.com/videos.html

** The Sierra Bullet Tech Team are another awesome source of help at: (800) 223-8799

Those two sources are worth their weight in gold, so be grateful and respectful to them.
 
NVcharlie said:
I know its federally illegal to sell my reloaded ammo without an FFL etc, and i never will.
Click to expand...

Not illegal... From the ATF website:
Is a person who reloads ammunition required to be licensed as a manufacturer?
Yes, if the person engages in the business of selling or distributing reloads for the purpose of livelihood and profit.

No, if the person reloads only for personal use.
Click to expand...

https://www.atf.gov/firearms/qa/person-who-reloads-ammunition-required-be-licensed-manufacturer

Note: I still wouldn't do it because of liability.. I suppose if they signed a letter stating that the stuff was loaded improperly and will blow their head and arms off, maybe i would consider selling it, but even then, why bother..
 
I don't provide ammo "for an afternoon of shooting" for anyone but family.

I will happily provide my ammo and use my guns to teach anyone who is new to shooting and wants to learn safety and proper techniques.

I will also use my tools and machines to teach anyone who sincerely wants to learn about reloading. But reload ammo for them in quantity? Nope. (I did it once, never again)
 
I gave 12 rounds of factory 158gr LSWCHP 38 special to the neighbor with his new snubby and 6 rounds of 130 grain ball...But, that was factory ammo for a gun I haven't owned in years. I make ammo fro a friend to use but that is through guns I own, so everything is already tailored. She buys components, so yes, it really is much cheaper for me in that exact regard. What would raise it up is if I costed the time I take I made 150 7.62x39mm projectiles last night. 4 hours between casting, powder coating and sizing/gas checking, and at my overtime rate that would cost someone a very pretty penny for those bullets, not to mention the whole loaded rounds. ;)
 
buck460XVR said:
I have three of my manuals sitting beside me here at the computer as I type. Here are their titles.

1). The 7th Hornady Handbook of Cartridge Reloading
2). Speer Reloading Manual #14
3).Lyman Reloading Handbook 49th Edition

While there is a small amount of information in all of them about fireformed cases, the majority of the instructional material contained within them, consists of full length sizing so cartridges can be safely used in all firearms. You should probably contact them and let them know.

When one Googles "what is reloaded ammunition?" this is what comes up.....



Another blurred definition? Probably not.
Click to expand...

I normally wouldn't quote wiki, but since you are quoting google that is an equivalent -

"The term handloading is the more generic term, as it refers to manual assembly of ammunition using components from any source. Reloading refers more specifically to the handloading of ammunition by re-using cases or shells from previously fired ammunition. The terms are often used interchangeably, as the techniques are largely the same whether using new or recycled components. The differences lie in the preparation of the cases or shells"

Pretty much what I said. When terms are used interchangeably without noting differences that is a blurred definition.
 
NVcharlie said:
Problem solved by loaning my 550 press to a new friend. Cant help everyone but i can help those who show a little initiative. Msgt James was elated.
Click to expand...
Cheating with a friend's wife or "loaning" him tools are two excellent ways to ruin a friendship, unless you're bartering.
 
I don't feel oblicated to furnish ammo to aquaintances or co-workers. I've made it a point that they don't know what I have. I would be willing to spot a new gun owner a box of factory ammo during a shortage. And I would offer a little training. Just maybe this would get them to come over to "Our" side. But only trusted friends and close family get to shoot my reloads.
 
I suppose it's a matter of risk tolerance. Liability springs to mind, trust another. And while I'll agree everyone has a right to defend themselves, that right does not obligate me or anyone else to provide the tools for that defense. Then comes the simple facet of human nature that when a person starts giving away items of value it quickly transforms from an act of charity from the giver to an entitlement to the receiver.
 
Status
Not open for further replies.

Similar threads

Charlie Martinez
  • Locked
Sale of Reloaded Ammo
2 3
Replies
70
Views
4K
gifbohane
gifbohane
A
  • Locked
Giving away supplies/ammo
2
Replies
34
Views
1K
armydog
A
andrewdl007
  • Locked
Should I begin reloading?
Replies
7
Views
442
dairycreek
D
N
price check help primers
Replies
23
Views
561
kidneyboy
kidneyboy
D
  • Locked
New to reloading, want to load .308 match ammo on the CHEAP
Replies
19
Views
4K
Critter183
C
Back
Top