Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

GSG 5 .22LR durability?

Discussion in 'Rifle Country' started by CoyoteSix, Dec 10, 2012.

Thread Status:
Not open for further replies.
  1. CoyoteSix

    CoyoteSix Member

    Joined:
    Aug 21, 2012
    Messages:
    370
    Location:
    Idaho
    Hey folks, I got to fondle a GSG 5 today. I was blown away with the quality! I was expecting cheap airsoft grade crap! It really felt substancial in my hands. It truly felt like it could be ran rough without me worrying about anything breaking.

    The info i've gotten from the internet while researching these things lead me to believe they were mostly cheap plastic. It felt like mostly aluminum.

    So THR what is your experience with the GSG 5? I'm really hoping it is as durable as it felt!
     
    Last edited: Dec 10, 2012
  2. CraigC
    • Contributing Member

    CraigC Member

    Joined:
    Jan 27, 2006
    Messages:
    15,316
    Location:
    West Tennessee
    They're well reputed enough and pass my hands-on inspection. Don't know why I haven't bought one yet. Now that I have a SIG 522 ordered, maybe I'll get the GSG next.
     
  3. CoyoteSix

    CoyoteSix Member

    Joined:
    Aug 21, 2012
    Messages:
    370
    Location:
    Idaho
    It's down to a fair price. about $340-$380 depending on your location.

    I'm just worried about parts breaking really. I hear GSG is a Airsoft company and I think about all the cheap airsoft guns I've broken since I was a younger gun nut 15.

    I'd like to hold GSG's products to the same standard I hold my 10/22. Utterly reliable and idiot proof.
     
  4. DurangoKid

    DurangoKid Member

    Joined:
    Nov 28, 2012
    Messages:
    97
    Location:
    Wyoming
    I have had a GSG 1911 .22 for 2 years. I changed out the main spring bushing and guide rod for the cutom one on the web. The GSG 1911 is a damn fine .22 Plinker. GSG also makes the SIG 1911 .22 it cost a few bucks more. The Colt 1911 produced by a Walther Div. that makes air guns and Blank pistols. The Colt 1911 .22 was made from a blank firing 9MM Non-Gun for Euro sales. That maybe why you have confused GSG 1911 s with air guns, Not.
     
  5. CoyoteSix

    CoyoteSix Member

    Joined:
    Aug 21, 2012
    Messages:
    370
    Location:
    Idaho
    Thanks for the info Durango. The GSG1911 is pretty eye catching as well. I've heard their products run fine on MOST bulk ammo that isn't REMINGTON GOLDEN BULLETS..

    Is this correct?
     
  6. DurangoKid

    DurangoKid Member

    Joined:
    Nov 28, 2012
    Messages:
    97
    Location:
    Wyoming
    Oh yes forgot. Don't buy any Remington Bulk for the GSG 1911. The GSG just loves the Federal Bulk. Do you have a Murdocks Ranch Supply over there? They have the best price on Federals here in Wyoming. The SIG Mags. fit the GSG as well. I bought 3 extra Mags for mine at the LSG. Most 1911 .45 add ons will fit the GSG. I put a Wilson Mag well on mine. I shoot 1911 Pistols mostly so my Holsters all fit the GSG. I was able to shoot mine in a centerfire combat match just for fun. The other shooters wanted to shoot the GSG all afternoon.:D
     
  7. CoyoteSix

    CoyoteSix Member

    Joined:
    Aug 21, 2012
    Messages:
    370
    Location:
    Idaho
    Nope, my store of choice lately is The Local Sportsman's Warehouse. We're a small town, no Cabela's, Gandermountain, or other large retailer. There is one Locally owned gun store but the customer service is horrible (Snobby attitude, general disrespect for Law Enforcement Officers and other Criminal Justice majors like myself) and they charge %30 more for guns. :fire:

    I wouldn't mind paying 10%-20% more for products to support local business, But with their horrible service and ludicrous prices, I try to avoid it completely unless I need to do an FFL transfer or noone else has specific firearm.
     
  8. Inebriated

    Inebriated Member

    Joined:
    Mar 25, 2011
    Messages:
    3,683
    Location:
    NC
    I've never seen any GSG (I've seen the same 3 on numerous occasions) last more than 2 magazines without a failure.
     
  9. CoyoteSix

    CoyoteSix Member

    Joined:
    Aug 21, 2012
    Messages:
    370
    Location:
    Idaho
    @Inebriated

    Were they using bad ammo? (Remington Thunderbolt/Golden Bullet)

    Almost any .22lr Semi Auto can run CCI Mini Mags though, that's the real test.

    Also, I give every .22lr semi-auto a break in period with good ammo. Were these guns broken in?

    Don't mean to be a smart*** but I'm curious and don't want to regret a purchase. :scrutiny:
     
  10. Inebriated

    Inebriated Member

    Joined:
    Mar 25, 2011
    Messages:
    3,683
    Location:
    NC
    My guess? Ammo it didn't like and a dirty rifle/mags. The guns should be fully broken-in by now, but they usually just have a random bulk box, so I doubt any of the owners took the time to find ammo it likes. I agree with you on using CCI ammo, though. It and Federal Automatch are all I use now, and I haven't had an ammo-related malfunction in a few thousand rounds. Let us know how it does for you!
     
  11. hq

    hq Member

    Joined:
    May 24, 2011
    Messages:
    1,177
    Location:
    Finland
    Actually the Colt 1911 rimfire has no interchangeable parts with Umarex blank guns. The method of operation is somewhat similar but with the exception of rigid barrel mount and build materials, the Colt is pretty much completely centerfire 1911-compatible.

    As far as GSG5 is concerned, mine has worked flawlessly. Trigger is horrible, but with some minor drilling, tapping and polishing it can be improved considerably. Accuracy is decent, one inch five shot groups at 50 yards are no problem with iron sights and overall build quality is good. It feels a bit plasticky, less substantial than a 9mm MP5, but not bad at all. Recommended? Maybe, if you're looking for a high cap plinker with tacticool cosmetics. I still prefer Armi Jäger AP84 (or AP80) to it, mostly because of better accuracy, better trigger and Galil looks, but they're quite rare and spare magazines are almost impossible to find.

    I got the GSG5 as a gift, for helping out a local gunsmith, so in the real sense of the word I didn't buy it. Given a choice I probably would've bought a rimfire AR upper or even S&W 15-22 instead, but that's just me.
     
  12. CraigC
    • Contributing Member

    CraigC Member

    Joined:
    Jan 27, 2006
    Messages:
    15,316
    Location:
    West Tennessee
    I never knew that Remington .22 ammo was garbage until I read it on the internet. I burn a good 20,000rds or more a year of the stuff and have nary a problem. Every rimfire is a law unto itself, you have to find what it likes.
     
  13. brnmw

    brnmw Member

    Joined:
    Oct 26, 2012
    Messages:
    259
    I purchased a GSG522 (MP5 copy) a couple of years ago and it holds up just fine. Quality seems to be good, and as long as I use HV rounds it cycles just fine. I think the only person that has had an issue with it was my brother-in-law being too careful how he releases the charging handle. He would release it to slow and it seemed to not want to feed correctly when he did that. So I told him to quite babying it and release it like a man or how you see them do it in the movies and it worked fine for him after that. (But mabye it is just that gun I do not know.)

    As for the Remington .22 ammo.... IMO it is garbage I have always had bad luck with it in almost every .22 gun I own. (I apologies in advance to the Remington faithful but: :barf:
     
  14. browningguy

    browningguy Member

    Joined:
    Jul 21, 2004
    Messages:
    4,644
    Location:
    Houston, TX
    I've had a GSG5 since they first came out and no problems with it at all, I shoot mostly CCI mini mags through it.
     
  15. DurangoKid

    DurangoKid Member

    Joined:
    Nov 28, 2012
    Messages:
    97
    Location:
    Wyoming
    hg research the history of the Umerex 1911 Colt .22. Its parents were stirile.:uhoh:
     
  16. hq

    hq Member

    Joined:
    May 24, 2011
    Messages:
    1,177
    Location:
    Finland
    A bit off topic for this thread, but http://ezine.m1911.org/showthread.php?t=86 explains Umarex-Colt's bloodline. It's a completely different gun than the 9mm PAK blank gun.

    I bought mine for IDPA/IPSC practice and suppressed plinking; I threw in a trigger, hammer, sear, hammer spring, mainspring and grips from my spare parts box to get 1:1 the same trigger pull and grip/trigger feel as my centerfire race guns and so far I've put a few thousands of rounds through it. Technical details aside, close enough, 1911-compatible where it matters, and it just works. I haven't tried GSG 1911 myself but then again, I probably don't have a need for another rimfire 1911 in the foreseeable future.
     
  17. Quick Shot xMLx

    Quick Shot xMLx Member

    Joined:
    Nov 5, 2011
    Messages:
    197
    Location:
    Charlotte, NC
    GSG-5 is good as long as you swap the screws for the RRages ones. Stock screws are stupid cheap and loosen up after a couple of mags. They can cause all sorts of problems including stovepipes, cracks in the bolt, a lot of different stuff.
     
  18. Hokkmike

    Hokkmike Member

    Joined:
    Feb 28, 2006
    Messages:
    2,436
    Location:
    Sullivan County PA
    Had a GSG AK. Required cleaning after every 4 magazines or so. Then it fed with no problem. To clean it right you have remove the butts stock. I didn't like that. I just ran a bore snake through it and wiped the breach area. It worked.

    My honest opinion is that I would NOT recommend a GSG purchase based on my experience.

    2 * out of 5....
     
  19. mf-dif

    mf-dif Member

    Joined:
    Jul 8, 2012
    Messages:
    321
    Location:
    Georgia
    I run golden bulletts through mine and it's fine.
     
  20. cpt-t

    cpt-t Member

    Joined:
    Dec 25, 2011
    Messages:
    571
    Location:
    South Central Kansas
    Gsg 5 22lr

    My Son & I both shoot a GSG 5 22LR and have done so for 2 or 3 years with no problems. We shoot them a lot in the 22 action shoots our gun club puts on. We think they are very well made and are very fast on the steel targets, we both use RED DOT sights and really enjoy them, weshoot the 22LR ammo that says on the box for SEMI AUTO RIFLES. Several different brands and have not had any problems. Both our rifles are very accruate, very well made, and a Hoot To Shoot.
    ken
     
  21. greyling22

    greyling22 Member

    Joined:
    Aug 6, 2007
    Messages:
    4,422
    Location:
    East Texas
    My friend has the ati gsg mp5sd copy. It has held up very well and is more accurate than my 10/22. Trigger is not too great. It's bulky though. And is a little hard to take apart. it is ammo picky. hates the golden bullet, runs the federal fine.
     
  22. Walt-AR

    Walt-AR Member

    Joined:
    Jun 17, 2012
    Messages:
    1
    Location:
    Behind the Iron curtain in N.Y.
    Gsg 5

    My son and I have GSG 5's we purchased a little after they came out. Between the two of us we have fired thousands of rounds without a problem and my son only cleans his about half as many times as I do. We shoot Fedral bulk box and the GSG just chews then up and spits them out. The gun is a lot of fun to shoot.
     
Thread Status:
Not open for further replies.

Share This Page