Rem.222
Member
S/n 61839
Hammer
One patent on cylinder
Small button on left.
Address on left side of barrel
DA
Adjustable
Hammer
One patent on cylinder
Small button on left.
Address on left side of barrel
DA
Adjustable
678xx. The last three digits are also on the back face of the cylinder but I used the blur tool in GIMP to obliterate in the picture. Full number is stamped on the left side of the frame under the grip and on the front strap.1. Serial Number (partials are welcome, but entire numbers will help more)?
Hammer mounted rebounding hammer. Thus only 8 rounds in the cylinder.2. Firing pin on hammer or mounted in frame?
There is a rim around the cylinder at the back so that the cartridge heads are not visible through the side. I presume that is the safety rim. I didn't see any patent numbers anywhere.3. Safety rim on cylinder? PATENT APPLIED FOR; one patent number; two patent numbers?
small square button.4. Cylinder release: 1" long lever on right side -or- small push button on left side of frame right in front of cylinder.
Right Side5. Location of Manufacturer's address - on top of barrel -or- on right side?
DA, even says so on the left side of the barrel.6. DA or SA?
Fixed, pinned.7. Adjustable or fixed front sight? If fixed - soldered in slot or pinned in slot?