Have you purchased anything gun related in the last three days?
- Thread starter If1HitU
- Start date
WooD
Member
Ordered a wood stock, hand guard, and flash hider for my Cetme C rifle.
aaaaa
Member
Set of three for my Phoenix HP22A. Factory followers are curved at the back so the slide pushes them down and runs forward.
Got them from here: https://www.ebay.com/itm/275491453829
Got them from here: https://www.ebay.com/itm/275491453829
jmorris
Member
- Joined
- Sep 30, 2005
- Messages
- 24,181
Had a bobcat come up into the yard ”warned” him with some #7 1/2 from an old wards 12ga bolt action. I have some decent race guns but wouldn’t leave them handy in the shop, due to cost. A friend asked if his son could come over and shoot last week and had a TAR 12, lots of plastic and was really cheap. That said, the thing ran like a top and checked the boxes, so I picked one up Sat morning.
The trigger is pretty awful, looks CNC laser cut and they didn’t grind the sear, so the pull is over the jagged kerf.
I just stoned it smooth and it’s not bad for a ”beater” gun, runs just as good as the one they had over.
The trigger is pretty awful, looks CNC laser cut and they didn’t grind the sear, so the pull is over the jagged kerf.
I just stoned it smooth and it’s not bad for a ”beater” gun, runs just as good as the one they had over.
Attachments
Last edited:
Legionnaire
Contributing Member
Well, I place a backorder for some 7mm PRC brass with Grafs back in February. It arrived on Saturday. Does that count? 
aaaaa
Member
500 rounds from Palmetto for $30. Even with the $10 shipping, a DEAL considering my LGS charges $8 a box of 50 for these.
aaaaa
Member
I keep watching You Tubes on the Phoenix HP22A and finding more cool stuff to buy for it. This time an extra power recoil spring. The factory springs are said to be somewhat weak and have to be replaced every 500 to 1000 rounds. They even sell 5-packs. This spring should last a lot longer.:
aaaaa
Member
Ordered a Bond Arms 3" barrel in .30 Carbine. Just to be sure I am ready for when it is delivered I ordered 4 boxes (50 rounds each) of Precision One .30 Carbine ammo and to get free shipping added a box of Norma Range and Training FMJ .45 ACP and a box of HSM Cowboy Action .41 Rem Mag 210 Grain Semi-Wadcutter. Also got 10% off on the barrel and $5 off the ammo (two different online shops).
Area 419 bolt handle extension/thread converter, and a bolt knob from Borden Accuracy. First item came yesterday, second will be here Monday.
www.area419.com
bordenrifles.com
Steel 5/16x24 Bolt Knob Adapters
Adapt your bolt to a standard male thread with these stainless bolt handle adapters. They are lathe spun and threaded to a Class 3 fit, and allow you to use most aftermarket bolt knobs. These have become necessary in the last few years as action makers go to smaller stock in their bolt-making...
www.area419.com
Search results for "Bolt knob" | Borden Accuracy
bordenrifles.com
These few items, as well as a new pair of Realtree Edge camo pattern hunting insulated Bibs… my current very worn out pair (in advantage Timber; old fashioned “walls” brand) lasted since I was in high school…
Also just got an MTM portable shooting table… my dad has trouble shooting prone due to back trouble (and I’m getting there tbh) and I really don’t feel like sighting in the new muzzleloader and eating 100gr of BH209 recoil!from prone… so… we’ll be able to move it around pretty well I think…
InTheSwamp
Member
Ergo grips. They have the free OD when you buy one black.
lionking
Member
- Joined
- Jul 6, 2006
- Messages
- 3,107
I haven't bought much as far as guns n ammo this year (did a little bit) I have been focusing on getting survival and tac gear together. I have bought a lot and tried a lot of different stuff and what I have found is while everyone crazes over plate carriers I still prefer old ALICE setup or FLC Molle vest overall, lightweight and tough.All these latest tactical molle gun belts, I still think a tough as nails very adjustable Alice belt is best for me, I prefer mobility over weight especially living in a southern red state that is 90-95 degrees in summer and 80's late spring and early winter and the fact I'm not 25 years old anymore that could deal with that kind of intense heat..
Lately I have been dying some ACU pouches to make them more friendly to a green environment. These GI pouches fit GI mags perfect, fit two PMAG good, or one single 7.62/308 mag great. Also can use for M1 carbine. They are made in America government contract mil-spec not flimsy China junk but still I think the Alice M16 pouch rocks best. I also dyed some uniforms
Lately I have been dying some ACU pouches to make them more friendly to a green environment. These GI pouches fit GI mags perfect, fit two PMAG good, or one single 7.62/308 mag great. Also can use for M1 carbine. They are made in America government contract mil-spec not flimsy China junk but still I think the Alice M16 pouch rocks best. I also dyed some uniforms
Attachments
irishlad
Contributing Member
Got new scope for my Savage 243. Vortex Diamondback 3.5-10x50 BDC
Col. Harrumph
Member
Yup. A brick of Federal small pistol primers. 9 cents apiece.
hoardingthemanual
Member
sinclair hand priming tool
theotherwaldo
Member
A sling, a bunch of sling swivels and related hardware and a rear sight for a mid-war Type 99.
1976B.L.Johns.
Member
85 rounds of linked 50 BMG for $2.00 a round plus the ammo can.
SCORE!
SCORE!
GHinNH
Member
Well technically..... went to the hardware store yesterday to get some 3mm hardware.
Couple weeks back, bought a 90deg worm drive gearmotor to replace the lackluster inline gear unit on my home made annealing machine, and needs different screws to mount.
Obviously I never make "mistakes", they are called "revisions".
Couple weeks back, bought a 90deg worm drive gearmotor to replace the lackluster inline gear unit on my home made annealing machine, and needs different screws to mount.
Obviously I never make "mistakes", they are called "revisions".
Area 419 bolt handle extension/thread converter, and a bolt knob from Borden Accuracy. First item came yesterday, second will be here Monday.
Steel 5/16x24 Bolt Knob Adapters
Adapt your bolt to a standard male thread with these stainless bolt handle adapters. They are lathe spun and threaded to a Class 3 fit, and allow you to use most aftermarket bolt knobs. These have become necessary in the last few years as action makers go to smaller stock in their bolt-making...
Search results for "Bolt knob" | Borden Accuracy
irishlad
Contributing Member
Very nice!!!
Similar threads
- Locked
