Husqvarna M1907 hammer parts

[Herb Fredricksen]

I transferred a very nice 1907 to a C&R friend in Oregon. The hammer was
jammed, and when he took it apart he found a a broken "roller" on the hammer
and that would not allow the sear to disengage from the hammer. I assume he
needs only the roller but he may need a hammer, too. Any idea where he can
get those parts?

I assume the Husqvarna 1907 has the same specs and uses the same parts as
the Browning 1903 it is licensed from but I need someone knowledgeable to
confirm that. Numrich lists the Browning parts, subject to availability

For reference, pages 36/37 of the NRA Firearms Assembly book shows the four
part assembly to consist of hammer, spring, roll and roll pin.

Thanks, Herb Fredricksen

PS, I've cross posted on FFF and TFL, too. I hope that's OK.

 

[Old Fuff]

Yes, at least the parts in question, should be the same. The hammer assembly consisted of the hammer, a roller, and the roller pin. I'm not sure what spring you might be referring to.

Edited to add: If you can't find the parts I suspect a roller and roller pin from a Colt model 1903 Pocket Model might be substituted.