Mark Mahler
Member
- Joined
- Jun 16, 2020
- Messages
- 59
I use the Lee classic loader, which only neck sizes. I'm only using the ammo in one specific rifle. I'm relatively new to the process, so I'm clearly not an authority. Here's my problem
I'm using two different batches of brass - Winchester that I bought a bag of 50 at Mills Fleet Farm, and Greek military HPX that I fired through my rifle. With the Mil brass, I have no problems at all, but with the Winchester, I have issues with the bullets being loose in the cartridge - I neck size the brass before priming and loading. It's not all the brass, but I'm not sure what to do about it.
I'm using two different batches of brass - Winchester that I bought a bag of 50 at Mills Fleet Farm, and Greek military HPX that I fired through my rifle. With the Mil brass, I have no problems at all, but with the Winchester, I have issues with the bullets being loose in the cartridge - I neck size the brass before priming and loading. It's not all the brass, but I'm not sure what to do about it.