Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Issues with my pistol

Discussion in 'Handguns: Autoloaders' started by Aaronw, Sep 8, 2010.

Thread Status:
Not open for further replies.
  1. Aaronw

    Aaronw Member

    Joined:
    Sep 8, 2010
    Messages:
    6
    I just recently purchased a hi point c9. It was working great for a cheap pistol until recently. I also have a Px4 Storm 9mm and a ruger p92 40.

    The issue with the hi point is the fact that with certain rounds such as federal or Winchester my rounds are being chambered easily and firing perfectly. I bought some military grade ammunition and fired it. It jams within 2 shots. I load 6 rounds into a clip that holds 8 so I know it isn't the tension and the ammunition fires well from my px4.

    When I fire the hi point it will jam and the clip will just randomly fall out of the pistol like it is being ejected by the power of the load. Does anyone have any idea what may cause this? The rounds are being chambered vertically and I have to unjam the pistol 10 to 15 times for a single box of 50 rounds.

    Any help would be greatly appreciated.
     
  2. Just One Shot

    Just One Shot Member

    Joined:
    Oct 31, 2008
    Messages:
    1,257
    Location:
    Ohio
    The only help I can offer is to suggest you stay with the ammo that works. Hipoints are not know for dependability. Sure, someone will chime in that theirs has 20,000 rounds through it without any problems but as a whole they are not a gun you want to count on in a self defense situation.
     
  3. Aaronw

    Aaronw Member

    Joined:
    Sep 8, 2010
    Messages:
    6
    Yeah no way in hell would I ever use it for self defense. That is what my Px4 is for and I have never had it jam once with maybe 3 thousand rounds.

    The hi point is for going to the range, and I feel it's accurate. From 30 yards I have put around 95% of the rounds into the target in nice groups. However now and then a round just goes haywire and fires up or down about 10 feet from where I had fired at.

    I am somewhat worried with the mag just ejecting from the pistol that something terrible could happen later down the road and I am considering just junking it and calling it a 150 dollar loss, not that it's a big deal.
     
  4. wow6599

    wow6599 Member

    Joined:
    Apr 6, 2008
    Messages:
    2,417
    Location:
    Wildwood, MO
    Some guns are just ammo sensitive, probably what's up with your Hi Point. What was the military grade ammo?
     
  5. Aaronw

    Aaronw Member

    Joined:
    Sep 8, 2010
    Messages:
    6
    It is pakistani 9mm 115gr . 2z ammo
     
  6. FatPants

    FatPants Member

    Joined:
    Mar 17, 2010
    Messages:
    286
    Prvi partizan?
     
  7. Aaronw

    Aaronw Member

    Joined:
    Sep 8, 2010
    Messages:
    6
    From what I gather it is from a company called Pakistan Ordinance Factory
     
  8. Hanzo581

    Hanzo581 Member

    Joined:
    Sep 28, 2006
    Messages:
    1,805
    Location:
    Chesapeake, Virginia
    If only one kind of ammo gave me trouble I'd just not use that type. Problem solved.
     
  9. Aaronw

    Aaronw Member

    Joined:
    Sep 8, 2010
    Messages:
    6
    Well upon further searching I found out this specific ammo I purchased is uzi ammo! Wonderful, thank you Dunhams for selling me ammo for a damn uzi.
     
  10. Skinsanity

    Skinsanity Member

    Joined:
    Feb 2, 2010
    Messages:
    94
    Some of the Pakistani ammo is loaded hotter, for subguns, most commonly you find this with Israeli ammo. Chances are the rounds are throwing your slide back too fast and your magazine cant keep up, try lubing the mazine a bit and see if that helps, as far as the magazine dropping out, the high point nine magazine release is in such a place that thumb quite often hits it during recoil, this is probably happening to you with the hotter rounds.

    Regards
     
  11. writerinmo

    writerinmo Member

    Joined:
    Sep 5, 2010
    Messages:
    414
    Location:
    Missouri
    I own a couple of Hi Points and am very active on their forums. The major percentage of problems with them are magazine related. The metal isn't heavy enough to take being banged around at all, something that a lot of us have contacted the company about but so far have only gotten minor changes in their design through. There are sticky's on the Hi Point firearms forum as to specs to adjust the mag ears to for best performance. Generally nose up is ears slightly too wide, nose into the feed ramp is front ears too narrow.

    But like Hanzo said, if it's only one brand of ammo I would fire something else before deciding that I had a problem. Mine like the Federal Champion and Blazer brass but not the WWB in the bulk packs.

    On the mag releasing randomly, if you are sure that you aren't inadvertently hitting it, then take the right side grip off and check the spring under it, make sure it is located correctly. You might also want to unload the pistol and look into the mag well to see if maybe the magazine catch got damaged on the top side somehow to where it isn't locating correctly under the tab on the mag.
     
  12. The Lone Haranguer

    The Lone Haranguer Member

    Joined:
    Jul 30, 2006
    Messages:
    11,717
    Location:
    Johnson City, TN
    A worn magazine catch (in the gun) or worn retention slot (in the magazine) could be causing both of those problems, by allowing the magazine to drop too low.
     
  13. Aaronw

    Aaronw Member

    Joined:
    Sep 8, 2010
    Messages:
    6
    I oiled the magazine and it actually fixed the problem. I have never had a problem with a hi point in the past, so this was kind of upsetting when it would not fire the ammo. However I am selling the remaining rounds to a friend of mine, more of a trade. 300 for 250. It's not bad on my part. He has Remington for trade. He likes the harder packed +p rounds.
     
  14. Skylerbone

    Skylerbone Member

    Joined:
    Feb 5, 2010
    Messages:
    3,378
    That "hotter spec" (read improper) ammo was the cause of much trouble to the Beretta 92 resulting in numerous failures, some catastrophic. Thus the 92FS which prevented slides from ejecting into the shooter's face.

    Reloading will save you more on ammo than cheap ammo and, if done right, less wear and tear on your pistols.

    Be safe.
     
  15. Full Metal Jacket

    Full Metal Jacket member

    Joined:
    Dec 11, 2009
    Messages:
    2,398
    Location:
    hiding in your bushes

    :eek:
     
  16. bigfatdave

    bigfatdave Member

    Joined:
    Jul 13, 2008
    Messages:
    5,961
    Location:
    Near Camp Perry
    THERE'S YOUR PROBLEM!

    It happens, particularly with oddball surplus stuff. Save that ammo for a carbine (hi point makes a surprisingly ergonomic one) or trade it to someone who has a 9mm long gun, it won't be a winner in most handguns.

    If you are seeking out cheap ammunition, steel case is the way to go, avoid the antique stuff.
     
  17. ET

    ET Member

    Joined:
    May 5, 2010
    Messages:
    301
    Location:
    Savannah, Ga.
    I was given a C-9 some 15 years ago by my brother. I quickly found out that these guns can be ammo sensitive. You simply need to stick with what your C-9 wants to shoot 100%. Dumping the Eastern European ammo is probably a good idea. I just ran 50 rounds of Russian steel cased stuff thru my TCP. I wasn't expecting much and wasn't disappointed. There are guns that like/dislike certain types of ammo. Make a note of what yours does/doesn't like and adjust accordingly.
     
  18. writerinmo

    writerinmo Member

    Joined:
    Sep 5, 2010
    Messages:
    414
    Location:
    Missouri
    I've used Federal Champion from Walmart, Blazer brass (Not the aluminum case), PMC, Winchester PDX1 bondeds, Magtech guardian golds and some Wolf in my Hi Points without any problems. Shot some WWB bulk pack, but after two underpowered rounds where the bullet literally fell out of the end of the barrel decided that was enough for me. Lots of people say the 50 round WWB works fine, but it's actually the same price as the Blazer and more expensive than the Federal so for the range I stick with those two, Federal and Blazer.
     
Thread Status:
Not open for further replies.

Share This Page