Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
You are using the old Black Responsive theme. We have installed a new dark theme for you, called UI.X. This will work better with the new upgrade of our software. You can select it at the bottom of any page.
Got my new Lee Deluxe turret in the mail. Got it set up and ready to go. Im using recapped brass at the moment but would like to know where the spent primers go when I used brass with spent primers. Any tips guys??
You've got to put in one of the little primer arms. Even if you're DEpriming, you need to put one of those one. Doesn't matter which size, small primer or large primer. It guides the spent primers out the hole in the side of the center rod so they fall down into the base of the press. I've got a notch cut out of the wood at that spot beneath the press so the spent primers fall into a coffee can. If you don't have a cutout there, the primers will just sit in there until you dump them out.
There should have been a clear tube with a cap on one end provided. The ram is actually hollow with a fitting on the bottom, no mods should be needed to your bench. I replaced the tube with one a little longer, then drilled about a 5/8" hole in the lid from a tall clear Gallon water bottle. Make sure you leave enough length on the tube so that is slides up and down, within the container lid, to allow ram full extesion (up and down) without pulling out of the bottle.
That's the other one Bula.
I have the same one Mike is talking about. Primer comes out a hole on the side of the ram.
The newer (I'm guessing) model has the hollow ram.
Lee Deluxe Turret Press - Spent Primers go where??
Got my new Lee Deluxe turret in the mail. Got it set up and ready to go. I'm using recapped brass at the moment but would like to know where the spent primers go when I used brass with spent primers. Any tips guys??
The primers go everywhere EXCEPT where they're supposed to go! The bench top, floor, down your shoe.
There should have been a clear tube with a cap on one end provided. The ram is actually hollow with a fitting on the bottom, no mods should be needed to your bench.
Yes, the classic turret is a very good upgrade on the deluxe turret. Positive spent primer handling. The deluxe, however makes a mess with the spent primers.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.