I am new to reloading so please bear with me. I recently purchased a Lee Classic Reloader kit For 44 magnum that came with a 1.3cc powder scoop. The supplied data card and the chart on Lee's website says the 1.3 scoop is equivalent to 19.8 grains H0110 or Win296 (not powders I want to learn on but its all they give me on the chart.) I also purchased a Lee, Lyman, and Hornady manuals to cross reference. My concern is this....all these manuals list a starting load of 23 grains for both powders but the Lee manual still says use the 1.3 scoop. is this incorrect info, are these scoops a worthwhile way to measure powder? I am slowly building my reloading setup and will take all advise seriously. Thank you.