Legacy Sports O/U

Status
Not open for further replies.

ifit

Member
Joined
Sep 28, 2008
Messages
1,305
wondering if anyone on board have any hands on experience with this particular brand of O/U shotguns? just ordered my first O/U its from legacy called the Silver Synthetic
 
Made by Escort/Hatsan, which means made in Turkey. Some Turkish guns are well made, many still have issues. It isn't that the Turks CAN'T build a good gun, they are having some issues here and there, and when guns are built to low price points, something in the quality arena has to give. Whether yours falls under that scenario, time will tell.

First thing to do is to check for consistent and equal POA/POI with both barrels. many times, cheaply made guns will have the barrels shooting in two different time zones. IF that happens here, there really isn't too much that can be done that wouldn't be financially overboard. If not, then great. Make sure you clean the grease/crud off and then regrease/lube per owner manual directions. I use grease on pivot areas and oil on sliding areas. Pivot areas include the hinge pin, the knuckles and any under lug areas.

Good luck with it!
 
thank you sir, good info. once I receive it will put in some range time as you mentioned to check for POA/POI with both barrels. this is the model I ordered

silver_synthetic_zps84263812.gif
 
finally my shotgun arrived, should have been earlier but my ffl dealer had a mix up, but for now heres some pics, and will take it to the range for some sighting in
001-2_zps935f1f3c.jpg
comes w/5 chokes 2 already installed on the sg, and tool and 3 spacers/stock
008_zpsf4d122b0.jpg
014_zps583ee202.jpg
041_zpsc6d670c4.jpg
045_zps80f31202.jpg
046_zpseea81448.jpg
051_zpsf7e31940.jpg
054_zpsd82dc2ae.jpg
052_zpsf2c2fbcc.jpg
 
first time at the range with the shotgun,
030-1_zps144b2e81.jpg
022_zps7a0d3a95.jpg
chokes that came installed from the factory
006_zps8f4cde07.jpg
008_zpsed8506a7.jpg
changed out chokes for 25y
016_zpsf65611cf.jpg
018_zpse57aa541.jpg
great shotgun, other than I guess I need to get used to the trigger as after the first trigger pull...I literally have to remove my finger completely/quickly from the trigger in order for the second trigger pull to reset, is this the norm on these type of shotguns? I guess im so used to semi-auto resetin themselves:eek:
 
Status
Not open for further replies.
Back
Top