Looking for load data for Zero 9mm 115gr FMJ - for competition

[SR_]

I got a good deal on some 9mm 115gr Zero FMJ bullets and I’m looking for suggested load data. I’ve got plenty of Clays powder on hand so that would be my first choice. But I'm not limited to, or stuck on using Clays.

I’m looking for bunny fart loads for IDPA competition. I just need to make power factor of 125,000.

Thanks in advance for your suggestions.

 

[71Commander]

I don't like Clays for 9's. I use either Titegroup or Bullseye. Can't help with any specifics as I use Masterblaster bullets.

 

[Canuck-IL]

Lots of data in this forum...
http://www.brianenos.com/forums/index.php?showforum=72
/Bryan

 

[jmorris]

If you want a light recoiling 9mm load that will make PF day in and day out in any conditions you need to go with a heavy bullet. A 147grain Berrys with 3.1 of VV310 1.16" OAL is the best I've felt. 3.1 grains of Titegroup with the same bullet and oal is also ok, but one can tell the difference.