Looking for some load data for 10mm with longshot

[kerreckt]

I load 9.2 grains Longshot behind a 180/190 grain jacketed bullet. When loading hardcast of the same weight I use 8.5 grains of Longshot. This works well with my Glock 20 which has a Lone Wolf barrel and 23lb Wolff recoil spring. It also shoots well in my Tanfoglio 10mm which has a 20lb Wolff recoil spring. I will probably change this spring to a 23lb. in the future.

 

[xxToranachxx]

I load 9.2 grains Longshot behind a 180/190 grain jacketed bullet. When loading hardcast of the same weight I use 8.5 grains of Longshot. This works well with my Glock 20 which has a Lone Wolf barrel and 23lb Wolff recoil spring. It also shoots well in my Tanfoglio 10mm which has a 20lb Wolff recoil spring. I will probably change this spring to a 23lb. in the future.

Thank you! I've only used it on some 357 magnum 110gr sjhp I had laying around. It worked really well as far as accuracy and pressure. I need to run a few through the chronograph for velocity though.

 

[Dudedog]

Now I'm loading up some 147gr(copper plated extreme bullets) 9mm range ammo for my wife. I got a jug of vihtavouri v-3n37 a few weeks before everything went out of stock on midway. Also managed to get 1k sm. Pistol primers and 1k of those extreme 147 grainers. I really wish they would have had 115 or 124gr at that time but pickings are slim as I'm sure you all know. My Lee 2nd edition book is the only source I have physically for data on this one.

Off thread for 10mm but since it's your thread

Data from VV

 

[xxToranachxx]

Off thread for 10mm but since it's your thread

Data from VV
View attachment 939169

Thanks that's much appreciated, yeah I should post this in a different sub I guess.

 

[Dudedog]

Glad to help,

We try to avoid thread drift , it happens,(the mods here are great and keep us in line a thankless job I'm sure) not so much a concern when it's your own thread

 

[Mike G29gen4]

Longshot and 10mm work very well together. I load a 180gr XTP with a Cci 350 primer mixed once fired nickel brass case and 9.5gr longshot set @ 1.260 for a very manageable (LOUD) round clocking 1305fps.
I get a 1.75in 5 shot group @ 15 yrds from a bench rest with a glock 29 G4.
I belive this would make a great self defense round or even medium size game eg. Hog deer from my Hi-Point carbine. The other powder I like in the 10mm is Blue Dot it works best at the high end @ 10.4gr with a 200gr XTP I haven't cronographed that round yet but will pass on the specs when I get to it.