Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Making a Glock more like an XD?

Discussion in 'Handguns: Autoloaders' started by FunYet, Jan 20, 2006.

Thread Status:
Not open for further replies.
  1. FunYet

    FunYet Member

    Joined:
    Dec 29, 2002
    Messages:
    411
    Location:
    Oh Hi Oh
    I have a Glock 26 and Springfield XD Compact 9mm. I have always liked shooting the 26 and have never really had an issue with Glock triggers. However, the more I shoot he the XD the more I like the feel of the XD trigger. I'm curious about Glock trigger modifications/options. What's available that might make the Glock trigger more XD-like? I think it's a matter of making it smoother rather than lighter, but don't have enough experience with Glock modifications to know.



    Funyet
     
  2. Longbow

    Longbow Member

    Joined:
    Dec 29, 2002
    Messages:
    1,145
    Location:
    City by the big lake
    Go here www.glocktalk.com and do a search. There's hope for the Glock trigger. But you must consider that the XD is really a single action. So the XD would really still come out better after some modification.

    here's another place to visit http://www.glockmeister.com/
     
  3. saspic

    saspic Member

    Joined:
    Jun 3, 2004
    Messages:
    129
    Location:
    San Antonio
    http://www.alpharubicon.com/mrpoyz/glock/
    The famous Glock 25 cent trigger job will smooth out the trigger. It will only lighten the trigger slightly, but it will feel nicer.
    You could install a 3.5 pound connector to make the trigger significantly lighter.
    Don't forget when shooting multiple shot strings with a Glock, after the first shot, just release the trigger very slightly to reset. With practice, it feels almost like a single action trigger.
     
  4. MTMilitiaman

    MTMilitiaman Member

    Joined:
    Apr 28, 2005
    Messages:
    2,458
    Location:
    Missoula, Montana
    Saspic, thanks for the link.

    And I have to admit, I very much admire your collection. I have the 20 and wouldn't mind the 29 and the EAA but I doubt very much I'll ever have an entire line up like that. Still love The Ten.
     
  5. Black Majik

    Black Majik Member

    Joined:
    Sep 13, 2003
    Messages:
    5,031
    Location:
    Orange County, California
    Quite honestly, there isn't any way to get a Glock trigger to mimic a XD. I've done the .25 cent trigger job, the connectors, fiddled with the springs, it still sucks.

    The XD trigger will always feel different than the Glock. Best thing to do just buy an XD, its not like they're expensive.

    Glocktalk has mounds of info on how to detail strip a Glock. I can detail strip a Glock in the same amount of time it takes to field strip a 1911. Its that easy. Go for the plunge, try out the 25 cent trigger job, see if polishing the internals help you. For me I felt the trigger pull was smoother, it didn't stage as much as before. In the end, the trigger still sucked and I got rid of it.

    Its difficult switching off a Glock to the 1911 back to a Glock at the shooting range :D
     
  6. axeman_g

    axeman_g Member

    Joined:
    Jan 26, 2003
    Messages:
    1,153
    Location:
    South Jersey
    glock trigger

    I had really good succes on my g22 with .25 trigger job and connector. The trigger pull is a little longer with 3.5, but it is much light and smoother. The main advantage is the almost instant reset, get back on target and smack it again.

    Thumbs up. I liked the xd trigger but did not like the extremly high bore axis which made a 9mm recoil like a .40 and .40 like a 10mm.
     
  7. Rockstar

    Rockstar member

    Joined:
    Apr 25, 2004
    Messages:
    1,353
    Try either the Ghost Ultimate 3.5# or the Scherer connector. Both offer less mush in the trigger pull than the factory 3.5# connector. By all means try the polishing and learn to shoot from reset, as has been suggested. Your Glock won't be an XD....and that's a good thing. :cool:
     
  8. Chris Rhines

    Chris Rhines Member

    Joined:
    Dec 22, 2002
    Messages:
    3,773
    Location:
    Potomac, Maryland - Behind enemy lines!!
    Although the stock XD trigger is slightly better than the stock Glock trigger*, the Glock trigger is somewhat more receptive to custom work. Here are some shops that do nice work on the Glock.

    http://www.vanekcustom.com/index.html
    I had a Vanek trigger on my late, lamented Glock 35. It broke at under two pounds, was smooth as glass, and totally reliable with all kinds of ammo. Highly, highly recommended.

    http://bb-enterprise.biz/Rhea.ivnu
    Dale Rhea is the grand-daddy of Glock trigger work. Not quite as nice as Vanek, but it's a drop-in kit.

    http://www.triggerkit.com/categoryN...Style=Style5&layout=ruby&categoryStyle=Style1
    Rafael Sotelo's drop-in Glock trigger kits. Yes, they really do break at two pounds. Again, not as refined as the Vanek trigger, but less than a third of the price. My personal favorite in a drop-in Glock trigger.

    http://www.custom-glock.com/trigger.html
    http://www.novakshandgunneroutlet.com/glock/glockservices.html
    Don't have any first-hand experience with either of these shops, but they both have long lists of satisfied customers.

    - Chris

    * - If you can deal with the long, mushy reset on the XD. I can't. One of the things that makes the Glock so shootable is the short, crisp reset on an otherwise undistinguished trigger.
     
Thread Status:
Not open for further replies.

Share This Page