Proline395
Member
So this is what I have been waiting for. This is called an ARES rifle and they are being made in Amelia, OH by a small FFL dealer/manufacturer. The stock, grips, optic, color and engraving were all selected by me. The lower is a CNC machined 7075 billet that is basically mil-spec.
The upper is a 100% custom design by the owner operator of The FFL. It is all 7075 cnc machined as well. It uses no off the shelf parts and everything is his design. It is piston driven, however it is all contained in the upper, using no buffer and no buffer spring (yes the tube is empty). The BCG is his design as well as the barrel. The barrel is pinned to the lower receiver through the front take down pin to improve accuracy. I also have a 20" barrel for 300 blackout that is easily swapped into the gun in about 2 minutes.
The upper is a 100% custom design by the owner operator of The FFL. It is all 7075 cnc machined as well. It uses no off the shelf parts and everything is his design. It is piston driven, however it is all contained in the upper, using no buffer and no buffer spring (yes the tube is empty). The BCG is his design as well as the barrel. The barrel is pinned to the lower receiver through the front take down pin to improve accuracy. I also have a 20" barrel for 300 blackout that is easily swapped into the gun in about 2 minutes.
Attachments
Last edited: