vaalpens
Member
- Joined
- Aug 14, 2014
- Messages
- 2,618
I just ordered a sample pack (100) of the MG 357SIG/125gr JHP bullets to see what the fuss is about. I am planning on testing them out for setback, cycling through the gun and a few exploratory 357sig loads. I am also planning to see if/how they perform in 9mm.
For those out there that load these bullets in 357sig. What is the minimum safe OAL for these bullets assuming you have mixed length brass. Can you load them to 1.135" with the mouth of the case still safely below the bullet ogive, or do you need to go a bit higher? I know the OAL is gun specific, but I just want to get and idea what the MIN OAL is based on the bullet shape.
Thanks in advance for any comments/information.
For those out there that load these bullets in 357sig. What is the minimum safe OAL for these bullets assuming you have mixed length brass. Can you load them to 1.135" with the mouth of the case still safely below the bullet ogive, or do you need to go a bit higher? I know the OAL is gun specific, but I just want to get and idea what the MIN OAL is based on the bullet shape.
Thanks in advance for any comments/information.