Steve's Gunz in the answer to your prayers, like he was for mine with my R92 44 shooting very high. Here's a link to his website, and he will email/talk with you if you need help. He has quality stuff, too, very good. Also, you will find a wealth of info here:
http://www.rossi-rifleman.com/
https://store.stevesgunz.com/
P.S. Here is his reply to my original query - I ordered the ones he recommended and it is dead on now:
Hi George ,
Thanks for the inquiry. Yep, shooting too high is pretty common with the Rossi 92’s particularly the round barrel carbines and the ranch hand. This is mainly because Rossi tries to do a one size fits and
the rear sight that comes on it is just too tall.
If you go to
Steves Gunz Web Store you will find replacement sights for the round barrel carbines like this
Flat Top rear sight - Round barrel or this Low Semi-buckhorn rear sight - Round barrel. These rears are lower than the stock Rossi and any of my
ROUND BARREL FRONT SIGHTS are slightly higher for the front. They also work with the Ranch Hand.
I don’t recommend a taller front mainly because the dovetail is too shallow and they tend to get knocked loose too easy the taller you go.
Or, you can go with my
Adjustable Bolt-Mounted Peep Sight Safety Replacement you can use the stock front with it.
You will need this
Dovetail Slot Blank to fill the barrel slot. Also, check under the rear sight to see if there are 4 holes. You may need these
Plug screws for Rossi 92 rifles.
Thanks,
Steve Young aka Nate Kiowa Jones Sass# 6765
Steve's Gunz aka "Rossi 92 Specialists"
205 Antler Lane
Lampasas TX 76550