Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

need to remove finger notches on my g21sf

Discussion in 'Handguns: Autoloaders' started by ca-c54, Oct 30, 2007.

Thread Status:
Not open for further replies.
  1. ca-c54

    ca-c54 Member

    Joined:
    Dec 16, 2006
    Messages:
    50
    I tried the search but I can't find anything about shaving finger notches.I love the gun but the raised notches sit right in the middle of my fingers and it's starting to bug me.I did not notice so much when I bought it,guess I was to excited about buying it.Anyway is there any way to remove them without it looking like a hack job.Thanks
     
  2. CWL

    CWL Member

    Joined:
    Jan 6, 2003
    Messages:
    6,505
    Possibly light sanding with very fine grit sandpaper (400, 600, 1000)?

    there are companies that do grip reductions on Glocks so it can be done.

    You can also get a Hogue Handall rubber sleeve that fits over the finger grooves; or try visiting Glocktalk.com to see what people there'd recommend.
     
  3. ca-c54

    ca-c54 Member

    Joined:
    Dec 16, 2006
    Messages:
    50
    Thanks CWL I'll try glocktalk,tried the handall but not much help.
     
  4. The Lone Haranguer

    The Lone Haranguer Member

    Joined:
    Jul 30, 2006
    Messages:
    11,717
    Location:
    Johnson City, TN
    Something like a wood rasp (e.g., Stanley Surform), or even a carefully wielded belt sander, should take the raised part of the finger grooves right off. You may want to make a "finish cut" with progressively finer files or sandpaper. You would not want to go too deep into the bottoms of the grooves, but some filing, grinding or sanding will be necessary to blend it in for a uniform appearance.
     
  5. shooting4fun

    shooting4fun Member

    Joined:
    Jan 20, 2003
    Messages:
    62
    Location:
    SE AZ West of the Pedro
    Good Day CA-C54, and et al.,

    I was in a similar situation with my G19. I found that using a course file < wood rasp is a good suggestion > to remove the bulk of the material. Blending was done with a fine file. Minor final finishing was done with sandpaper. Starting off with sandpaper without good technique may produce results that might not be satisfactory. Using the file provided better control of the roughing out action. This was important to maintain proper shape and symmetry of the finished grip.

    I will close that with the Glock's polymer, speed is not your friend as the friction of aggressive methods will melt the polymer rather than remove the material. Take your time, your patience will be rewarded. While the whole process is quite simple, it is also quite easy to train wreck thing if you loose focus on what you're doing.

    Good Luck!
     
  6. Blueduck

    Blueduck Member

    Joined:
    Dec 26, 2002
    Messages:
    1,184
    As above I've used files then finished with sandpaper to good effect on a few G-23's ove the past years.

    You will of course end up with a couple of smooth "Bands" in the spot where your grooves were. This may or may not bother you. I like to "dimple" that area lightly with a soldering iron, you can practice on the mag loaders which will give you a pretty good feel for how to work it. I've always sprayed the tip with "Pam" before soldering, don't know if it really helps or not, just what was suggested so thats what I have always done :)

    Before you start anything however remmeber this will likely reduce the resale value of your pistol, and knock you out of many "Stock" firearm competitions if either is important to you.
     
  7. W.E.G.

    W.E.G. Member

    Joined:
    Sep 26, 2006
    Messages:
    7,395
    Location:
    all over Virginia
    Dremel!!!!!!!!!
     
  8. Blueduck

    Blueduck Member

    Joined:
    Dec 26, 2002
    Messages:
    1,184
    One of my favorite lines from the gunsmithing section of Glocktalk :"You Freeze!! Put DOWN THE DREMEL and step away from the Glock" :neener:

    Seriously a friend did his 23 with a dremel and it came out fine, he is good with it though. Too fast a rotation speed and you can end of with plastic sludge instead of a sanded surface... :eek:
     
    Last edited: Oct 31, 2007
  9. sojournerhome

    sojournerhome Member

    Joined:
    Jan 30, 2007
    Messages:
    142
    Location:
    North Texas
    The third-gen glocks don't fit my hand for the same reason. The gun shop owner suggested a dremel as well.
     
  10. BamBam-31

    BamBam-31 Member

    Joined:
    Dec 25, 2002
    Messages:
    2,019
    There was a suggestion somewhere on how to unsmooth the sanded plastic areas after you're done shaping it. Something like tapping on rough sandpaper with a small hammer to rough up the surface and match the OEM "smooth" surfaces. Too lazy to search, tho....
     
  11. Harley Quinn

    Harley Quinn Member

    Joined:
    Aug 8, 2006
    Messages:
    2,490
    Location:
    No. CA.
    The idea of friction not being your friend is for sure regarding the material.
    It will take some time and a good file that has the correct cutting angle.

    http://www.fine-tools.com/feile.htm

    Working with a file is an art and you need to make sure you have the right one for the job at hand.

    Good luck.
     
  12. CountGlockula

    CountGlockula Member

    Joined:
    Oct 1, 2006
    Messages:
    3,522
    Location:
    In a Los Angeles coffin.
    I remember seeing one online where the three finger humps were shaved off. It actually looks great...1st generationish.
     
  13. Harley Quinn

    Harley Quinn Member

    Joined:
    Aug 8, 2006
    Messages:
    2,490
    Location:
    No. CA.
    To bad you can't get all the new stuff with the choice of first or second generation grip, but at least you can file it and have custom;)

    I see where "Hogue" offers the addition of the third grip, slid over the first or second grip:what:

    http://www.getgrip.com/main/overview/handall.html

    If you don't like it, you can cut it off...

    :):D:p
     
  14. ca-c54

    ca-c54 Member

    Joined:
    Dec 16, 2006
    Messages:
    50
    Hey guys thanks for all the ideas,looks like I'llhave to take a trip to home depot this weekend.I'll let you know how it turns out.
     
  15. MAKster

    MAKster Member

    Joined:
    Jul 8, 2006
    Messages:
    2,231
    If you want a more professional finish there are many companies that will remove the finger groves. Two that are mentioned frequently are Bowie Tactical Concepts and Robar. You can also get the grip stipled.
     
  16. Autolycus

    Autolycus Member

    Joined:
    Feb 13, 2006
    Messages:
    5,456
    Location:
    In the land of make believe.
    To bad Glock does not offer this as an option.
     
  17. Desertscout

    Desertscout Member

    Joined:
    Jan 25, 2006
    Messages:
    320
    Location:
    NM
    Here's a G21SF that we did for a LEO recently.


    IMG_G21SF.jpg
     
  18. possum

    possum Member

    Joined:
    Oct 12, 2005
    Messages:
    8,942
    Location:
    Concord, N.C.
    if you didn't want to do it yourself, which i don't think that i would, but that is because i don't trust myself that much. there are places like Robar,and BTC that do great work. as well they can do some other bonuses to it while its there.
     
  19. DougW

    DougW Member

    Joined:
    Mar 16, 2004
    Messages:
    2,059
    Location:
    North Texas
    I dremmeled my 3rd gen G19, then finished with fine file and fine grit sandpaper. Works and feels wonderful.
     
  20. rockstar.esq

    rockstar.esq Member

    Joined:
    Dec 9, 2004
    Messages:
    1,475
    I have to wonder if the stippling is done with some form of heated iron. If so, it might stand to reason that a combination of heat and cutting would make for a smooth fluid cut.
     
  21. Josh Aston

    Josh Aston Member

    Joined:
    Apr 12, 2006
    Messages:
    613
    Location:
    Mountain Home, ID
    I've done a couple and I used a wood burner for the stippling. Not too difficult at all.
     
  22. TimboKhan

    TimboKhan Moderator

    Joined:
    Apr 15, 2005
    Messages:
    8,139
    Location:
    Greeley, CO
    One of the gun magazines (or maybe it was SGN) ran an article fairly recently describing exactly how to stipple, and it seems like Ray told me the last time I was in Jensens that he has stippled his own guns. It's literally just a wood-burner and some patience. For shaving grips down, I think (don't qoute me on this) that if you rasp it down pretty good, then file, then hit it up with some fine sandpaper thats about it. A dremel would make this super easy to do. The big custom shops might use a hot saw or something, but my guess is that they just dremel the sucker.
     
  23. JDGray

    JDGray Member

    Joined:
    Sep 16, 2005
    Messages:
    5,131
    Location:
    SW MI.
    :):):):):)
     
    Last edited: Nov 11, 2007
  24. cedjunior

    cedjunior Member

    Joined:
    Sep 29, 2006
    Messages:
    174
    Location:
    Irving, TX
  25. rodregier

    rodregier Member

    Joined:
    Aug 5, 2007
    Messages:
    1,681
    Location:
    Halifax,NS Canada
    I speculate that part of the reason why Glock went with the contoured grip was to juggle the BATFE "factoring criteria" points for importation. With points for a so-called target grip, they could probably drop using the adjustable rear sight as a means to get enough points to permit importation. As such, they wouldn't want to offer any variants that were not target grips. The molds to make the frames are very expensive, so they likely only maintain one per frame size. I would speculate that they altered the 2nd generation molds to make the 3rd generation molds. If so there's no longer an option for them to produce 2nd generation frames in any case.
     
Thread Status:
Not open for further replies.

Share This Page