Plinking Loads for 458 Magnum

Status
Not open for further replies.

BigG

Member
Joined
Dec 24, 2002
Messages
7,080
Location
Dixieland
Does anybody have any data for launching lead bullets (c. 405 gr) with the 458 Win Mag? I would like to get decent iron sight accuracy at 50 - 100 yards for some inexpensive fun.

Thanks,

George
 
Just to give you some ideas the 458 Win Mag is very close in capacity to the old 45-90, and black powder works good through it. You may also have some luck with powders like 3031 that can be loaded down quite a bit. Take a look at how low the charges are for the 45-70. There are several other powders out there that would probably work better for down loading though.
 
BigG, 18 gr. of Unique should work with your 405 gr. lead bullet.

For a 25 yd. plinking round ball load, you can use 8 gr. of Unique or 6 gr. of Bullseye with a .460" ball.

Don
 
Lyman lists reduced loads for cast bullets. Try their data.
The first .458 I shot was being handloaded at the range, using dippers, Blue Dot reduced loads, and home cast bullets.
 
Status
Not open for further replies.
Back
Top