I have a Lee single stage. I use a RCBS ram prime. I hate picking the primers up and placing them on the ram. So much so that I am thinking about getting a Redding Big Boss 2 and the automatic primer feed. The reason I use the ram prime on the lee instead of the built in primer is that the Lee press primer seater does not seem to seat the primers as deep or as well. I have a RCBS hand primer and do not much like hand priming. Old, weak hands. And I still manage to drop primers.
So my question is, how well does the on the press Redding system actually work. I expect many of you have it on the Turret press. Am I going to like the system or am I going to end up using my ram prime on the new press too after flushing a bit of money and a good bit of remounting to change presses. And I am not much interested in the Turret press. I use the LNL bushings and like that system.
I have watched some videos of the Redding. A question is, with handgun cases, can I deprime and then reprime on the same stroke without removing the case from the press.
So my question is, how well does the on the press Redding system actually work. I expect many of you have it on the Turret press. Am I going to like the system or am I going to end up using my ram prime on the new press too after flushing a bit of money and a good bit of remounting to change presses. And I am not much interested in the Turret press. I use the LNL bushings and like that system.
I have watched some videos of the Redding. A question is, with handgun cases, can I deprime and then reprime on the same stroke without removing the case from the press.