@Mark_Mark
Ok, Dr's finally discharged me
Can't get my photo uploader to work (I'll try to keep playing with it but...)
I do however have the parts #'s of the stuff Dillon sent me.
1: #20064, powder die, 550/650
2: #21275, body collar, complete
3: #13426, powder funnel, "A", rifle.
Keep in mind that I was adapting the powder measure from a SD so, if you already have a Dillon powder measure from another setup you may not need some of these parts.
I know I said in an earlier post to call Dillon and they'll be happy to get you set up but I just checked their website for these parts #'s and there was a big notice that their phone system was down with persistent problems
Figures.
Point is it can be done easily and, at least in my circumstance, was a game changer in
my way of loading; "bulk", blasting ammo, done in large batches on a single stage (done over 12,000 .223 in this manner)
FWIW: this Lee press was gifted to me.
If I was to have started our fresh on my own, I would've plunked my hard earned pennies down on an XL750 (or 550 at the least).
Hope this helps!
Edit: got my photos to work.
Notice the clamp-on body collar.
This needed replaced with a 7/8"-14 compatible collar.
Here on my Lee.
The 2 return springs are visible and necessary since fail-safe linkage is to be removed.